China Custom 2JK Series Mining Hoist Winch Parts for Coal Mine with Hot selling

Product Description

2JK Series Mining Hoist Winch Parts for Coal Mine

 

Introduction:
Mine hoist can be divided into 2 kinds; 1 kind is JKE series single rope mining hoist and the other is Multi-rope friction hoist. 
This series mine hoist including 2m-5m single tubular and double tubular types, and can be used for mining hoist, personnel lifting and material and equipment descending from vertical shafts or inclined shafts of coal, metal and nonmetal ores.
JK mine hoist is mainly used in inclined roadways and wells of coal mines, metal mines and non-metal mines to hoist or lower personnel and materials.

Technical parameters:

Model Drum Tension
PF
Tension 
Differe
 
Rope
Diameter
Lift height (m) Max 
Speed
Reduce 
speed ratio
Motor
Speed
 
Number Dia Width 1-layer 2-layer 3-layer
 
   
m KN mm m m/s r/min
JK-2×1.5/20 1 2.0 1.5 62 24 305 650 1571 5.2 20.0 1000
JK-2×1.5/31.5 31.5
JK-2×1.8/20 1.80 375 797 1246 20.0
JK-2×1.8/31.5 31.5
JK-2.5×2/20 2.5 2.00 83 28 448 945 1475 5.0 20.0 750
JK-2.5×2/31.5 31.5
JK-2.5×2.3/20 2.30 525 1100 1712 20.0
JK-2.5×2.3/31.5 31.5
JK-3×2.2/20 3.0 2.20 135 36 458 966 1513 6.0 20.0
2JK-2×1/11.2 2 2.0 1.00 62 40 24 182 406 652 7.0 11.2
2JK-2×1/20 20.0
2JK-2×1/31.5 31.5
2JK-2×1.25/11.2 1.25 242 528 838 11.2
2JK-2×1.25/20 20.0
2JK-2×1.25/31.5 31.5
2JK-2.5×1.2/11.2 2.5 1.20 83 65 28 843 8.8 11.2
2JK-2.5×1.2/20 20.0
2JK-2.5×1.2/31.5 31.5
2JK-2.5×1.5/11.2 2.5 1.50 83 65 28 319 685 1080 8.8 11.2
2JK-2.5×1.5/20 20.0
2JK-2.5×1.5/31.5 31.5
2JK-3×1.5/11.2 3.0 135 90 36 289 624 994 10.5 11.2
2JK-3×1.5/20 20.0
2JK-3×1.5/31.5 31.5
2JK-3×1.8/11.2 1.80 362 770 1217 11.2
2JK-3×1.8/20 20.0
2JK-3×1.8/31.5 31.5
2JK-3.5×1.7/11.2 3.5 1.70 170 115 40 349 746 12.6 11.2
2JK-3.5×1.7/20 20.0
2JK-3.5×2.1/11.2 2.10 450 950 11.2
2JK-3.5×2.1/11.2 20.0
2JK-4×2.1/10 4.0 245 160 48 421 891 12.6 10.0 600
2JK-4×2.1/11.2 11.2
2JK-4×2.1/20 20.0
2JK-5×2.3/10 5.0 2.30 280 180 52 533 12 10.0 500
2JK-5×2.3/11.2  

Possible defects:

Defect Causes
Unfilled sections Insufficient material
Low pouring temperature
Porosity Melt temperature is too high
Non-uniform cooling rate
Sand has low permeability
Hot tearing Non-uniform cooling rate
Surface projections Erosion of sand mold interior
A crack in the sand mold
Mold halves shift

FAQ
Q: How about the quality of your products?
A: Our machines are manufactured strictly according to national and international standards, and we take a test on each equipment before delivery.
 
 
Q: How about the price?
A: We are manufactory, and we can give you lower price than those trade companies. Besides, customers from Made in China can get a discount.
 
Q: Do you provide after-sale service?
A: Yes. The warranty period of our machines is 1 year, and we have a professional after-sale team to promptly and thoroughly solve your problems.
 
Q: Do you provide equipment operation training?
A: Yes. We can send professional engineers to the working site for equipment installation, adjustment, and operation training. All of our engineers have passports.

 

Types of V-Belts and Their Properties

A v-belt’s inside length and pitch are determined by measuring along the bottom side. The included angle of a v-belt is measured from its flanks when it is extended. Most v-belt sections are 40 degrees. There are different types of v-belts, and the dimensions of each are standardized by different organizations. This article will introduce the different types of v-belts and their properties.
belt

Notched v-belts reduce bending stress

Notched V-belts reduce bending stress by reducing the axial length of the belt by 2 or more notches. These notches are characterized by different profiles, which differ in the pitch angle and the inside length. ISO and DIN standards are followed by the manufacturers of these belts. Notched v-belts are used on industrial machinery in countries other than the US.
Compared to the standard V-belts, notched ones are designed to resist bending stress better and offer better heat dissipation. They also last longer and run cooler than standard V-belts. Furthermore, they are about 2 percent more energy efficient than their standard counterparts. Therefore, notched V-belts are a viable replacement for standard V-belts.
Notched V-belts are commonly used in industrial applications because of their low price, ease of installation, and availability of many sizes. Another advantage of notched V-belts is that they provide more wedging force and higher load capacity. Notched V-belts have a wider v-groove than flat ones, which makes them more effective for heavy-duty applications.
Notched V-belts also provide better traction. They reduce bending stress, which is beneficial for preventing fatigue and tearing of v-belts. Additionally, v-belts can be installed in an existing equipment to add more performance. And with proper maintenance and installation, notched V-belts will provide trouble-free service for many years to come.

Ribbed v-belts reduce heat dissipation

Various kinds of v-belts are available for varying applications. The more popular types are the fractional horsepower and the double-V. Fractional horsepower v-belts are designed for light-duty applications, such as machine shop equipment and household appliances. The common sectional names are 2L, 3L, 4L, and 5L. The L in each of these belts refers to the top width of the belt, multiplied by 1 eighth inch.
Unlike conventional belts, ribbed v-belts are flexible, making them ideal for use in vibrating loads. They reduce heat dissipation and can be ordered in single or multiple sets to match your application. However, ribbed v-belts should not be mounted on deep-groove sheaves, as this can cause the belt to turn over. If you use deep-groove sheaves, the risk of rupture is very high. Deep-groove sheaves can also cut banded belts. Extremely worn sheaves can also cause the belt to rip.
The 2 types of ribbed v-belts differ in their construction and application. While both types have trapezium cross-sections, they are similar in that they are made of polyurethane or other durable materials. Ribbed v-belts have an additional layer of fabric on the elastomer core for reduced noise and better heat dissipation.
Ribbed v-belts are available in a variety of sizes, including trough v-belts. Their cross-sections are categorized by their top and bottom widths and depths. The included angle of most v-belt sections is approximately 40 degrees. Different types of v-belts have different cross-sections, and these cross-sections are standardized by various organizations.
As the load increases, a ribbed v-belt will wedge into the groove and decrease the amount of friction needed to maintain the correct torque. Flat belts can track off the pulleys due to friction. However, V-belts are more stable and require less width than flat belts. The main advantage of ribbed v-belts is their increased efficiency.
The global-local finite-element model is also used to calculate the maximum and minimum J-integrals during a belt’s running cycle. The data is then used to evaluate the durability of ribbed v-belts in various applications. The numerical models used for the calculations involve a ribbed V-belt with 5 full ribs.
belt

Cogged v-belts increase lateral rigidity to reduce belt whip

Cogged v-belts are designed for maximum performance and durability on even the harshest drive systems. These belts are made from high-modulus polyester cords that resist hardening and stretch and provide superior balance and strength. They also feature raw-edge sidewalls to reduce slip and drive vibration. In addition, they have specially-formulated rubber compounds for oil resistance. CZPT Cog-Belt offers substantial savings in downtime, energy consumption and horsepower.
A double cogged v-belt combines the benefits of cogged and double vee-belts. Its bonded reinforced tie band offers enhanced flexibility and reduces belt whipping in multiple-belt drives. Double cogged v-belt dimensions vary depending on the standards of the manufacturer. Regardless of the type, you’ll want to use a belt that is aligned correctly.
Standard v-belts are also known as wrapped or raw edge v-belts. Wrapped V-belts feature fabric covers above and beneath the cord to increase lateral rigidity and reduce belt whip. Cogged V-belts also have fabric covers to prevent wear on the core and increase the belt’s operating temperature. They’re ideally suited for applications that require high-temperature operation.
Cogged V-belts can significantly decrease energy consumption and improve power transmission capabilities. They also have a bias-cut cover stock that provides axial and lateral stability while preserving the cord integrity. A fiber loaded cogged construction offers optimum flexibility while minimizing heat buildup. It can be installed on any type of drive, including chain conveyors and industrial-grade machines.
The two-layer tie-band permanently bonds multiple belts together. This provides maximum cord support, heavy shock absorption, and stability. The belts are also engineered with patented banding processes that eliminate belt turnover and distribute load evenly across the drive. CZPT Cog-Band Belts minimize belt whip and provide stability. They also minimize belt turnover and rollover in heavy-duty industrial applications.
A classic v-belt is the most common and economical belt. Its nominal dimensions are 1/2″ to 1-11/2″ wide and 16″ to 400 inches long. The width is usually 40 degrees. Different organizations use different cross-sections to classify v-belts. The following table provides a general comparison of the 2 types. The Cogged V-Belt is designed to reduce belt whip by increasing the lateral rigidity of the belt.
belt

Cogged v-belts provide superior environmental resistance

The patented design of the Dayco V-Belt provides maximum power transmission while combining the benefits of a cogged belt and raw-edge construction. The belt’s top cogged design helps increase air flow around it, preventing deterioration and extending its useful life. The belt’s three-ply design features neoprene impregnated fabric for superior durability and a specially-formulated polyester cord for increased strength and stability.
A variety of v-belts are available, with cogged and notched versions presenting unique characteristics. Cogged V-belts are more flexible than uncogged versions and feature ‘X’-shaped grooves for enhanced heat dissipation. Cogged V-belts are interchangeable with conventional v-belts, although their ‘X’ design is most common. Hexagonal v-belts are a popular option for applications where traction is needed.
Another type of Cogged V-belt is designed specifically for outdoor power equipment. This v-belt is brown, with smooth clutching covers. Its aramid cord is very strong and provides superior durability in adverse conditions. Cogged V-belts can withstand severe shock loads and are therefore ideal for outdoor power equipment. Furthermore, they offer superior environmental resistance, minimal stretch, and a long service life.
A Cogged V-belt is composed of tensile cords that are supported by a rubber stock. Different manufacturers use different synthetic rubber stocks for this purpose. These materials help to extend the belt’s operating temperature range and resist premature failure. In addition to tensile cords, the belt’s body is covered with a fabric cover. The fabric is treated to form a chemical bond with the core materials, which allows it to withstand constant bending.

China Custom 2JK Series Mining Hoist Winch Parts for Coal Mine     with Hot sellingChina Custom 2JK Series Mining Hoist Winch Parts for Coal Mine     with Hot selling