Product Description
Product Description
E-ASIA Bearing ,The rolling element of bearing is taper roller, cone roller bearing inner circle has tapered roller.Conical extension all the to the same point on the axis bearing, tapered roller bearings belong to the body bearing, our company can according to customer’s special requirements, and design production, can provide a metric system size and non-standard bearings.
Tapered roller bearing can be a direction under high load, radial and axial practical in low and middle speed aspect, we are able to offer the following range of bearings: single row, double row, four column type, precision for PO and level P6.
| Name: | 1688 Factory Rolamentos Rodamientos Rulman Single Row 32305 32303 11749 44649 11949 Auto Automotive Wheel Hub Metric Inch Taper Tapered Roller Bearing |
| Model No. | 32305 32303 11749 44649 11949 |
| Type: | Tapered Roller Bearing/Taper Roller Bearing |
| Weight: | Standard weight |
| Specifications: | Standard size |
| Material: | Chrome steel GCR-15 |
| CAGE: | Steel Cage and Nylon Cage |
| Rolling body: | Roller |
Features and Benefits:
1. Low friction and running temperatures, low noise, and vibration
2. High running speeds
3. High quality and performance capabilities for your application
4. Accommodate radial loads and axial loads in both directions
5. Available with a variety of greases for most conditions, including food quality grease, high-temperature grease, and CHINAMFG Oil
6. Increased reliability and provide long bearing and lubricant service life
Product Parameters
| Our Main products | ||
| 1.Chassic Parts | Bearings | Clutch Release Bearings |
| Tensioner Bearings/Pivot shaft | ||
| wheel bearings | ||
| Wheel Hub Units | ||
| Suspension Parts | Shock Absorber | |
| universal Joint/ universal Joint | ||
| Half Shaft | ||
| Steering parts | Steering Pump | |
| Steering Gear | ||
| 2.Clutch&Braking Systerm | Clucth Cylinders | Clutch Master Cylinders |
| Clutch Slave Cyllinders | ||
| Brake Cylinders | Brake Master Cylinders | |
| Brake Slave Cylinders | ||
| 3.Electric Parts | Ignition systems | ignition coils |
| ignition wire set | ||
| Spark Plug | ||
| Exhaust system | Exhaust gas recirculation control valve | |
| EGR(exhaust gas recirculation)valve | ||
| Air flow meter | ||
| Electronic fuel injection system components | Oxygen sensor | |
| Electric throttle position sensor | ||
| Fuel Pump | ||
| fuel injector Nozzle | ||
| air flow sensor | ||
| Crankshaft position sensor | ||
| Camshaft location sensor | ||
| Idle speed switch | ||
| Detonation sensor | ||
| fuel Pressure sensor | ||
| Fan resistance | ||
Same Series Bearings We Offer:
| 80571AC | 566425.H195 | VKBA5423 |
| 581079AC | 566426.H195 | VKBA5424 |
| 85715AC | 566427.H195 | VKBA5425 |
| 85710B | 566283.H195 | VKBA5314 |
| 85710.07 | 566074.H195 | VKBA5316 |
| 805092C | 566834.H195 | VKBA5408 |
| 85714A | 566830.H195 | VKBA5409 |
| 85714.26 | 57571.H195 | VKBA5377 |
| 805092.07 | 568968.H195 | VKBA5379 |
| 805003A.H195 | 571762.H195 | VKBA5549 |
| 85718 | 566834.H195 | VKBA5412 |
| 85712 | 564734.H195 | VKBA5415 |
| 805415 | 572813A | BTH-0571 |
| 801400 | 567549 | BTH-0018 |
| 801794B | 528983A | BTH-0571 |
| 801974A.H195 | 528983B | BTH-0053 |
| 85712A | 534565 | BTH-0055 |
| 85713 | 528946 | BTH-0068 |
| 803628 | 568879 | BTH-0072 |
| 805011C | 543562 | BTH-0073 |
| 805248 | 538971 | BTH-0074 |
| 801961.15 | 85713 | BTH-0087 |
| 805008.08 | BTH-0084 | |
| BTH-0822 |
Our Advantages
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
FAQ
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Customized: | Non-Customized |
|---|---|
| Standard Parts: | Yes |
| Universal: | Yes |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do electronic or computer-controlled tensioner rollers enhance belt system performance?
Electronic or computer-controlled tensioner rollers offer advanced features and capabilities that enhance the performance of belt systems in vehicles. These innovative tensioner rollers utilize electronic sensors, actuators, and control algorithms to optimize tension, alignment, and overall operation. Here’s a detailed explanation of how electronic or computer-controlled tensioner rollers enhance belt system performance:
1. Real-Time Tension Control:
Electronic tensioner rollers continuously monitor the tension in the belt and can adjust it in real-time. Using sensors and feedback mechanisms, these tensioner rollers measure the tension and communicate with the control unit to make precise adjustments. Real-time tension control ensures that the belt remains within the optimal tension range, minimizing the risk of slippage or excessive tension that could lead to premature wear or belt failure.
2. Adaptive Belt Alignment:
Computer-controlled tensioner rollers can also monitor and adjust the alignment of the belt. By analyzing sensor data and using actuators, these tensioner rollers can make small adjustments to correct any misalignment. Adaptive belt alignment helps ensure that the belt remains properly aligned with the pulleys, reducing wear, noise, and power losses associated with misalignment. It contributes to improved belt system performance and longevity.
3. Load Compensation:
Electronic tensioner rollers can dynamically adjust the tension based on the load or operating conditions. By analyzing inputs from various sensors, such as engine load, temperature, or accessory demands, these tensioner rollers can adapt the tension to optimize performance and efficiency. Load compensation ensures that the belt system operates optimally under different load scenarios, enhancing overall drivability and preventing belt-related issues.
4. Integrated Belt Health Monitoring:
Some electronic tensioner rollers feature integrated belt health monitoring capabilities. They utilize sensors to measure parameters such as belt wear, temperature, or vibration. By continuously monitoring the belt’s condition, these tensioner rollers can provide early warning signs of potential belt failures or maintenance needs. Integrated belt health monitoring helps prevent unexpected belt failures, improve maintenance planning, and optimize the performance and reliability of the belt system.
5. Diagnostic Capabilities:
Electronic or computer-controlled tensioner rollers often have diagnostic capabilities that can communicate with the vehicle’s onboard computer system. They can provide diagnostic information, fault codes, or performance data, allowing technicians to troubleshoot and address belt system issues more efficiently. Diagnostic capabilities contribute to quicker and more accurate diagnosis, reducing downtime, and improving overall belt system performance.
6. System Integration:
Electronic tensioner rollers can be integrated into the vehicle’s overall electronic control system. They can communicate and coordinate with other components, such as the engine management system or accessory controllers. This integration allows for optimized operation and coordination between the belt system and other vehicle systems, improving drivability, efficiency, and performance.
7. Advanced Control Algorithms:
Computer-controlled tensioner rollers employ advanced control algorithms to optimize tension, alignment, and other parameters. These algorithms take into account various inputs, such as engine speed, load, temperature, and system requirements, to determine the optimal operating conditions for the belt system. The use of advanced control algorithms ensures precise and efficient operation, contributing to enhanced belt system performance.
In summary, electronic or computer-controlled tensioner rollers enhance belt system performance by providing real-time tension control, adaptive belt alignment, load compensation, integrated belt health monitoring, diagnostic capabilities, system integration, and advanced control algorithms. These features optimize the operation of the belt system, improve drivability, reduce maintenance needs, and enhance the overall performance and reliability of the vehicle’s belt-driven systems.
What factors should be considered when selecting tensioner rollers for different industrial applications?
When selecting tensioner rollers for different industrial applications, several factors need to be taken into consideration. These factors include:
1. Load and Tension Requirements:
The load and tension requirements of the specific industrial application are crucial factors to consider. It is important to determine the maximum load the tensioner roller will experience and the required tension for proper belt operation. This information helps in selecting a tensioner roller that can handle the anticipated loads and provide the necessary tension to prevent belt slippage or excessive wear.
2. Belt Type and Size:
The type and size of the belt being used in the industrial application are important considerations. Different belts have varying characteristics, such as width, thickness, and tooth profile. It is essential to choose a tensioner roller that is compatible with the specific belt type and size to ensure proper fit, alignment, and tension distribution.
3. Operating Speed:
The operating speed of the industrial application is a critical factor when selecting tensioner rollers. High-speed applications generate centrifugal forces that can impact belt tension and introduce vibrations. Tensioner rollers designed for high-speed applications are typically equipped with features to absorb vibrations and maintain consistent tension, ensuring reliable power transmission at elevated speeds.
4. Environmental Conditions:
The environmental conditions in which the tensioner roller will operate should be considered. Factors such as temperature extremes, humidity, dust, dirt, chemicals, and exposure to moisture or corrosive substances can affect the performance and durability of the tensioner roller. Selecting a tensioner roller with appropriate materials and protective coatings ensures its reliability and longevity in the specific environmental conditions.
5. Alignment and Adjustment Mechanism:
The alignment and adjustment mechanism of the tensioner roller play a crucial role in maintaining proper belt tension. Consider the ease of installation, adjustment, and alignment when selecting a tensioner roller. Look for features such as adjustable mounting positions, tension adjustment mechanisms, and reliable locking mechanisms that facilitate easy and precise tension adjustment and alignment of the belt.
6. Maintenance and Serviceability:
The maintenance and serviceability aspects of the tensioner roller should be taken into account. Evaluate the accessibility of the tensioner roller for inspection, lubrication, and maintenance tasks. Choose a tensioner roller that allows for easy replacement of worn or damaged components, minimizing downtime and maintenance costs in the industrial application.
7. Compatibility with the System:
Ensure that the tensioner roller is compatible with the overall belt drive system and other components in the industrial application. Consider factors such as the mounting arrangement, space constraints, and integration with other system elements. Compatibility ensures proper fit, functionality, and overall system performance.
8. Industry Standards and Regulations:
Complying with industry standards and regulations is essential when selecting tensioner rollers for industrial applications. Consider any specific requirements or guidelines set by relevant regulatory bodies or industry associations. Adhering to these standards helps ensure safety, reliability, and compliance with applicable regulations.
In summary, when selecting tensioner rollers for different industrial applications, it is important to consider factors such as load and tension requirements, belt type and size, operating speed, environmental conditions, alignment and adjustment mechanism, maintenance and serviceability, compatibility with the system, and adherence to industry standards and regulations. Considering these factors ensures the appropriate selection of tensioner rollers that will effectively support the belt drive system and optimize the performance and reliability of the industrial application.
Can you describe the benefits of using tensioner rollers for optimal belt performance?
Using tensioner rollers in a belt drive system offers several benefits that contribute to optimal belt performance. Here’s a detailed description of the advantages of using tensioner rollers:
1. Maintaining Proper Belt Tension:
Tensioner rollers play a crucial role in maintaining the proper tension of belts within a drive system. They apply the necessary force to keep the belts taut, preventing slack and ensuring optimal power transmission. By maintaining proper tension, tensioner rollers help prevent belt slippage, which can result in the inefficient operation of engine accessories, reduced power output, and increased wear on the belts and other components.
2. Preventing Belt Misalignment:
Tensioner rollers also help prevent belt misalignment. When belts are not properly aligned, they can rub against other components, causing friction and wear. Misalignment can lead to excessive heat generation, noise, and even belt failure. Tensioner rollers, by maintaining the correct tension, help keep the belts aligned and running smoothly, minimizing the risk of misalignment-related issues.
3. Absorbing Belt Vibrations:
Belts in a drive system can experience vibrations due to various factors such as engine operation, load changes, or belt stretch. These vibrations can adversely affect belt performance and increase stress on the system. Tensioner rollers, with their spring-loaded design, help absorb belt vibrations and provide stability to the belt drive system. By dampening vibrations, tensioner rollers contribute to smoother and quieter operation.
4. Compensating for Belt Stretch and Wear:
Over time, belts can stretch or experience wear due to continuous use and exposure to various elements. Tensioner rollers are designed to compensate for belt stretch and wear by automatically adjusting their position. They help maintain the proper tension in the belts, compensating for any elongation or reduction in belt length. This self-adjusting feature ensures consistent belt tension throughout the lifespan of the belts, promoting optimal performance and longevity.
5. Improving Belt Lifespan:
By maintaining proper tension, reducing vibrations, and preventing misalignment, tensioner rollers contribute to the longevity of belts. When belts are under the correct tension and run smoothly, they experience less stress and wear, resulting in an extended lifespan. Using tensioner rollers helps protect the belts from premature failure, reducing the need for frequent belt replacements and minimizing downtime and maintenance costs.
6. Enhancing Overall System Efficiency:
Optimal belt performance achieved through the use of tensioner rollers translates into improved system efficiency. When belts are properly tensioned and aligned, power transmission between the engine and various accessories or components becomes more efficient. This can result in enhanced overall system performance, improved fuel efficiency, and reduced energy losses, leading to cost savings and better utilization of resources.
7. Simplifying Maintenance:
Tensioner rollers can simplify maintenance tasks in belt drive systems. Their self-adjusting capabilities reduce the need for frequent manual adjustments to maintain proper tension. Additionally, tensioner rollers are often equipped with visual indicators or markings that allow for easy inspection of their condition. This simplifies maintenance checks, making it easier to identify worn or damaged tensioner rollers and replace them promptly, ensuring the continued optimal performance of the belt drive system.
In summary, using tensioner rollers in a belt drive system offers numerous benefits for optimal belt performance. These include maintaining proper belt tension, preventing misalignment, absorbing vibrations, compensating for belt stretch and wear, improving belt lifespan, enhancing overall system efficiency, and simplifying maintenance. Incorporating tensioner rollers into a belt drive system is essential for maximizing performance, minimizing downtime, and ensuring reliable operation of the system.
editor by CX 2023-12-19