Product Description
Product Description
E-ASIA Bearing ,The rolling element of bearing is taper roller, cone roller bearing inner circle has tapered roller.Conical extension all the to the same point on the axis bearing, tapered roller bearings belong to the body bearing, our company can according to customer’s special requirements, and design production, can provide a metric system size and non-standard bearings.
Tapered roller bearing can be a direction under high load, radial and axial practical in low and middle speed aspect, we are able to offer the following range of bearings: single row, double row, four column type, precision for PO and level P6.
| Name: | 1688 Factory Rolamentos Rodamientos Rulman Single Row 32305 32303 11749 44649 11949 Auto Automotive Wheel Hub Metric Inch Taper Tapered Roller Bearing |
| Model No. | 32305 32303 11749 44649 11949 |
| Type: | Tapered Roller Bearing/Taper Roller Bearing |
| Weight: | Standard weight |
| Specifications: | Standard size |
| Material: | Chrome steel GCR-15 |
| CAGE: | Steel Cage and Nylon Cage |
| Rolling body: | Roller |
Features and Benefits:
1. Low friction and running temperatures, low noise, and vibration
2. High running speeds
3. High quality and performance capabilities for your application
4. Accommodate radial loads and axial loads in both directions
5. Available with a variety of greases for most conditions, including food quality grease, high-temperature grease, and CHINAMFG Oil
6. Increased reliability and provide long bearing and lubricant service life
Product Parameters
| Our Main products | ||
| 1.Chassic Parts | Bearings | Clutch Release Bearings |
| Tensioner Bearings/Pivot shaft | ||
| wheel bearings | ||
| Wheel Hub Units | ||
| Suspension Parts | Shock Absorber | |
| universal Joint/ universal Joint | ||
| Half Shaft | ||
| Steering parts | Steering Pump | |
| Steering Gear | ||
| 2.Clutch&Braking Systerm | Clucth Cylinders | Clutch Master Cylinders |
| Clutch Slave Cyllinders | ||
| Brake Cylinders | Brake Master Cylinders | |
| Brake Slave Cylinders | ||
| 3.Electric Parts | Ignition systems | ignition coils |
| ignition wire set | ||
| Spark Plug | ||
| Exhaust system | Exhaust gas recirculation control valve | |
| EGR(exhaust gas recirculation)valve | ||
| Air flow meter | ||
| Electronic fuel injection system components | Oxygen sensor | |
| Electric throttle position sensor | ||
| Fuel Pump | ||
| fuel injector Nozzle | ||
| air flow sensor | ||
| Crankshaft position sensor | ||
| Camshaft location sensor | ||
| Idle speed switch | ||
| Detonation sensor | ||
| fuel Pressure sensor | ||
| Fan resistance | ||
Same Series Bearings We Offer:
| 80571AC | 566425.H195 | VKBA5423 |
| 581079AC | 566426.H195 | VKBA5424 |
| 85715AC | 566427.H195 | VKBA5425 |
| 85710B | 566283.H195 | VKBA5314 |
| 85710.07 | 566074.H195 | VKBA5316 |
| 805092C | 566834.H195 | VKBA5408 |
| 85714A | 566830.H195 | VKBA5409 |
| 85714.26 | 57571.H195 | VKBA5377 |
| 805092.07 | 568968.H195 | VKBA5379 |
| 805003A.H195 | 571762.H195 | VKBA5549 |
| 85718 | 566834.H195 | VKBA5412 |
| 85712 | 564734.H195 | VKBA5415 |
| 805415 | 572813A | BTH-0571 |
| 801400 | 567549 | BTH-0018 |
| 801794B | 528983A | BTH-0571 |
| 801974A.H195 | 528983B | BTH-0053 |
| 85712A | 534565 | BTH-0055 |
| 85713 | 528946 | BTH-0068 |
| 803628 | 568879 | BTH-0072 |
| 805011C | 543562 | BTH-0073 |
| 805248 | 538971 | BTH-0074 |
| 801961.15 | 85713 | BTH-0087 |
| 805008.08 | BTH-0084 | |
| BTH-0822 |
Our Advantages
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
FAQ
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Customized: | Non-Customized |
|---|---|
| Standard Parts: | Yes |
| Universal: | Yes |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can you provide insights into the importance of proper tensioner roller alignment?
Proper tensioner roller alignment is of utmost importance in a belt drive system as it directly affects the system’s functionality, performance, and longevity. Here are detailed insights into the importance of proper tensioner roller alignment:
1. Optimal Belt Tension:
Proper tensioner roller alignment ensures optimal belt tension, which is crucial for the efficient operation of the belt drive system. When the tensioner roller is correctly aligned, it applies the appropriate tension to the belt, keeping it properly tensioned and preventing excessive slack or tightness. Optimal belt tension ensures efficient power transfer, minimizes belt slippage, reduces wear on the belt and other components, and maximizes the overall performance of the system.
2. Prevents Belt Misalignment:
Tensioner roller alignment plays a vital role in preventing belt misalignment. Misalignment occurs when the belt deviates from its intended path, causing it to run off-center or make contact with adjacent components. Improper tensioner roller alignment can introduce lateral forces on the belt, leading to misalignment. Belt misalignment can result in reduced power transmission efficiency, increased wear on the belt and pulleys, and the generation of noise and vibrations. Proper tensioner roller alignment helps maintain the belt’s alignment, ensuring smooth operation and minimizing the risk of misalignment-related issues.
3. Reduces Belt Wear and Failure:
Proper tensioner roller alignment helps minimize belt wear and failure. Misalignment can cause the belt to rub against the pulleys or other components, resulting in accelerated wear and damage to the belt. Excessive wear can lead to belt stretching, cracking, or even premature failure. By ensuring proper tensioner roller alignment, the belt remains in its intended position, reducing friction, wear, and the risk of belt failure. This extends the lifespan of the belt and minimizes the need for frequent replacements, resulting in cost savings and improved system reliability.
4. Minimizes Noise and Vibration:
Correct tensioner roller alignment contributes to reduced noise and vibration levels in the belt drive system. Misalignment can cause the belt to oscillate, vibrate, or produce noise as it rubs against the pulleys or other components. These vibrations and noise can be transmitted throughout the system, leading to discomfort, increased wear on components, and a decrease in overall system efficiency. Proper tensioner roller alignment ensures smooth belt operation, minimizing vibrations and noise, and providing a quieter and more comfortable working environment.
5. Improves System Efficiency:
Proper tensioner roller alignment improves the overall efficiency of the belt drive system. Misalignment can result in energy losses due to increased friction, belt slippage, or inefficient power transfer. When the tensioner roller is correctly aligned, it helps maintain optimal belt contact with the pulleys, reducing energy losses and ensuring efficient power transmission. Improved system efficiency leads to reduced energy consumption, increased productivity, and cost savings over the long term.
6. Ensures Reliable Performance:
Tensioner roller alignment is critical for ensuring reliable performance of the belt drive system. Misalignment can lead to unexpected system failures, breakdowns, or unplanned downtime. Proper tensioner roller alignment helps maintain the overall stability and reliability of the system, reducing the risk of sudden failures or disruptions. By ensuring reliable performance, proper tensioner roller alignment contributes to increased productivity, improved operational efficiency, and enhanced system longevity.
7. Facilitates Maintenance and Service:
Proper tensioner roller alignment simplifies maintenance and service tasks. When the tensioner roller is correctly aligned, it is easier to access and adjust, allowing for straightforward tension adjustments or replacement when necessary. Maintenance personnel can quickly identify and address any alignment issues, ensuring that the system remains in optimal working condition. Proper tensioner roller alignment facilitates efficient maintenance practices, reduces downtime during servicing, and enhances the overall serviceability of the belt drive system.
In summary, proper tensioner roller alignment is crucial for the optimal performance, longevity, and reliability of a belt drive system. It ensures optimal belt tension, prevents misalignment, reduces wear on the belt, minimizes noise and vibration, improves system efficiency, and facilitates maintenance and service. By giving due attention to tensioner roller alignment, system operators can maximize the benefits of their belt drive systems and avoid potential issues that can arise from misalignment.
Can tensioner rollers be customized for specific industries or machinery configurations?
Yes, tensioner rollers can be customized to suit specific industries or machinery configurations. The ability to customize tensioner rollers allows for optimal performance and compatibility with unique requirements. Here are some aspects to consider:
1. Size and Dimensions:
Tensioner rollers can be customized to meet specific size and dimensional requirements. This includes variations in diameter, width, and overall dimensions to ensure proper fit and alignment within the machinery or system. Custom sizing ensures that the tensioner roller integrates seamlessly with other components and accommodates the available space constraints.
2. Load Capacity:
Industries and machinery configurations can have varying load capacities based on the application’s demands. Customized tensioner rollers can be designed to handle specific load requirements, ensuring they can support the intended loads without compromising performance or longevity. This customization helps prevent premature wear or failure due to excessive loads.
3. Material Selection:
Tensioner rollers can be customized by selecting materials that are best suited for the specific industry or machinery configuration. Different materials offer varying properties such as strength, durability, resistance to heat, chemicals, or abrasion. Customization allows for the selection of materials that can withstand the unique environmental conditions and operational demands of the application.
4. Coatings and Surface Treatments:
Customization of tensioner rollers also includes the application of coatings or surface treatments to enhance their performance and durability. Coatings such as ceramic, rubber, or Teflon can provide increased wear resistance, reduce friction, and improve the lifespan of the tensioner roller. Customized surface treatments can enhance corrosion resistance or provide specific surface properties required for the application.
5. Mounting and Adjustment Mechanisms:
Tensioner rollers can be customized to incorporate specific mounting and adjustment mechanisms based on the machinery or system configuration. This includes options for adjustable mounting positions, tension adjustment features, or quick-release mechanisms for easy installation, maintenance, and tension adjustments. Customized mounting and adjustment mechanisms ensure optimal functionality and ease of use.
6. Special Features and Accessories:
Depending on the industry or machinery requirements, tensioner rollers can be customized with special features and accessories. These may include additional bearings, seals, or guards to enhance protection, improve performance, or meet specific safety standards. Customized tensioner rollers can also incorporate sensors or monitoring systems to enable condition monitoring and predictive maintenance.
7. Compliance with Industry Standards:
Customized tensioner rollers can be designed to comply with specific industry standards, regulations, or certifications. Industries such as automotive, aerospace, or food processing may have stringent requirements that need to be met. Customization ensures that tensioner rollers meet the necessary standards and provide reliable performance within the specified guidelines.
In summary, tensioner rollers can be customized to suit specific industries or machinery configurations. Customization allows for tailoring the size, load capacity, material selection, coatings, mounting mechanisms, special features, and compliance with industry standards. By customizing tensioner rollers, industries can ensure optimal performance, longevity, and compatibility with their unique requirements.
Can you describe the benefits of using tensioner rollers for optimal belt performance?
Using tensioner rollers in a belt drive system offers several benefits that contribute to optimal belt performance. Here’s a detailed description of the advantages of using tensioner rollers:
1. Maintaining Proper Belt Tension:
Tensioner rollers play a crucial role in maintaining the proper tension of belts within a drive system. They apply the necessary force to keep the belts taut, preventing slack and ensuring optimal power transmission. By maintaining proper tension, tensioner rollers help prevent belt slippage, which can result in the inefficient operation of engine accessories, reduced power output, and increased wear on the belts and other components.
2. Preventing Belt Misalignment:
Tensioner rollers also help prevent belt misalignment. When belts are not properly aligned, they can rub against other components, causing friction and wear. Misalignment can lead to excessive heat generation, noise, and even belt failure. Tensioner rollers, by maintaining the correct tension, help keep the belts aligned and running smoothly, minimizing the risk of misalignment-related issues.
3. Absorbing Belt Vibrations:
Belts in a drive system can experience vibrations due to various factors such as engine operation, load changes, or belt stretch. These vibrations can adversely affect belt performance and increase stress on the system. Tensioner rollers, with their spring-loaded design, help absorb belt vibrations and provide stability to the belt drive system. By dampening vibrations, tensioner rollers contribute to smoother and quieter operation.
4. Compensating for Belt Stretch and Wear:
Over time, belts can stretch or experience wear due to continuous use and exposure to various elements. Tensioner rollers are designed to compensate for belt stretch and wear by automatically adjusting their position. They help maintain the proper tension in the belts, compensating for any elongation or reduction in belt length. This self-adjusting feature ensures consistent belt tension throughout the lifespan of the belts, promoting optimal performance and longevity.
5. Improving Belt Lifespan:
By maintaining proper tension, reducing vibrations, and preventing misalignment, tensioner rollers contribute to the longevity of belts. When belts are under the correct tension and run smoothly, they experience less stress and wear, resulting in an extended lifespan. Using tensioner rollers helps protect the belts from premature failure, reducing the need for frequent belt replacements and minimizing downtime and maintenance costs.
6. Enhancing Overall System Efficiency:
Optimal belt performance achieved through the use of tensioner rollers translates into improved system efficiency. When belts are properly tensioned and aligned, power transmission between the engine and various accessories or components becomes more efficient. This can result in enhanced overall system performance, improved fuel efficiency, and reduced energy losses, leading to cost savings and better utilization of resources.
7. Simplifying Maintenance:
Tensioner rollers can simplify maintenance tasks in belt drive systems. Their self-adjusting capabilities reduce the need for frequent manual adjustments to maintain proper tension. Additionally, tensioner rollers are often equipped with visual indicators or markings that allow for easy inspection of their condition. This simplifies maintenance checks, making it easier to identify worn or damaged tensioner rollers and replace them promptly, ensuring the continued optimal performance of the belt drive system.
In summary, using tensioner rollers in a belt drive system offers numerous benefits for optimal belt performance. These include maintaining proper belt tension, preventing misalignment, absorbing vibrations, compensating for belt stretch and wear, improving belt lifespan, enhancing overall system efficiency, and simplifying maintenance. Incorporating tensioner rollers into a belt drive system is essential for maximizing performance, minimizing downtime, and ensuring reliable operation of the system.
editor by CX 2024-01-30