Product Description
Product Description
E-ASIA Bearing ,The rolling element of bearing is taper roller, cone roller bearing inner circle has tapered roller.Conical extension all the to the same point on the axis bearing, tapered roller bearings belong to the body bearing, our company can according to customer’s special requirements, and design production, can provide a metric system size and non-standard bearings.
Tapered roller bearing can be a direction under high load, radial and axial practical in low and middle speed aspect, we are able to offer the following range of bearings: single row, double row, four column type, precision for PO and level P6.
| Name: | 1688 Factory Rolamentos Rodamientos Rulman Single Row 32305 32303 11749 44649 11949 Auto Automotive Wheel Hub Metric Inch Taper Tapered Roller Bearing |
| Model No. | 32305 32303 11749 44649 11949 |
| Type: | Tapered Roller Bearing/Taper Roller Bearing |
| Weight: | Standard weight |
| Specifications: | Standard size |
| Material: | Chrome steel GCR-15 |
| CAGE: | Steel Cage and Nylon Cage |
| Rolling body: | Roller |
Features and Benefits:
1. Low friction and running temperatures, low noise, and vibration
2. High running speeds
3. High quality and performance capabilities for your application
4. Accommodate radial loads and axial loads in both directions
5. Available with a variety of greases for most conditions, including food quality grease, high-temperature grease, and CHINAMFG Oil
6. Increased reliability and provide long bearing and lubricant service life
Product Parameters
| Our Main products | ||
| 1.Chassic Parts | Bearings | Clutch Release Bearings |
| Tensioner Bearings/Pivot shaft | ||
| wheel bearings | ||
| Wheel Hub Units | ||
| Suspension Parts | Shock Absorber | |
| universal Joint/ universal Joint | ||
| Half Shaft | ||
| Steering parts | Steering Pump | |
| Steering Gear | ||
| 2.Clutch&Braking Systerm | Clucth Cylinders | Clutch Master Cylinders |
| Clutch Slave Cyllinders | ||
| Brake Cylinders | Brake Master Cylinders | |
| Brake Slave Cylinders | ||
| 3.Electric Parts | Ignition systems | ignition coils |
| ignition wire set | ||
| Spark Plug | ||
| Exhaust system | Exhaust gas recirculation control valve | |
| EGR(exhaust gas recirculation)valve | ||
| Air flow meter | ||
| Electronic fuel injection system components | Oxygen sensor | |
| Electric throttle position sensor | ||
| Fuel Pump | ||
| fuel injector Nozzle | ||
| air flow sensor | ||
| Crankshaft position sensor | ||
| Camshaft location sensor | ||
| Idle speed switch | ||
| Detonation sensor | ||
| fuel Pressure sensor | ||
| Fan resistance | ||
Same Series Bearings We Offer:
| 80571AC | 566425.H195 | VKBA5423 |
| 581079AC | 566426.H195 | VKBA5424 |
| 85715AC | 566427.H195 | VKBA5425 |
| 85710B | 566283.H195 | VKBA5314 |
| 85710.07 | 566074.H195 | VKBA5316 |
| 805092C | 566834.H195 | VKBA5408 |
| 85714A | 566830.H195 | VKBA5409 |
| 85714.26 | 57571.H195 | VKBA5377 |
| 805092.07 | 568968.H195 | VKBA5379 |
| 805003A.H195 | 571762.H195 | VKBA5549 |
| 85718 | 566834.H195 | VKBA5412 |
| 85712 | 564734.H195 | VKBA5415 |
| 805415 | 572813A | BTH-0571 |
| 801400 | 567549 | BTH-0018 |
| 801794B | 528983A | BTH-0571 |
| 801974A.H195 | 528983B | BTH-0053 |
| 85712A | 534565 | BTH-0055 |
| 85713 | 528946 | BTH-0068 |
| 803628 | 568879 | BTH-0072 |
| 805011C | 543562 | BTH-0073 |
| 805248 | 538971 | BTH-0074 |
| 801961.15 | 85713 | BTH-0087 |
| 805008.08 | BTH-0084 | |
| BTH-0822 |
Our Advantages
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
FAQ
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Customized: | Non-Customized |
|---|---|
| Standard Parts: | Yes |
| Universal: | Yes |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can you provide insights into the importance of proper tensioner roller alignment?
Proper tensioner roller alignment is of utmost importance in a belt drive system as it directly affects the system’s functionality, performance, and longevity. Here are detailed insights into the importance of proper tensioner roller alignment:
1. Optimal Belt Tension:
Proper tensioner roller alignment ensures optimal belt tension, which is crucial for the efficient operation of the belt drive system. When the tensioner roller is correctly aligned, it applies the appropriate tension to the belt, keeping it properly tensioned and preventing excessive slack or tightness. Optimal belt tension ensures efficient power transfer, minimizes belt slippage, reduces wear on the belt and other components, and maximizes the overall performance of the system.
2. Prevents Belt Misalignment:
Tensioner roller alignment plays a vital role in preventing belt misalignment. Misalignment occurs when the belt deviates from its intended path, causing it to run off-center or make contact with adjacent components. Improper tensioner roller alignment can introduce lateral forces on the belt, leading to misalignment. Belt misalignment can result in reduced power transmission efficiency, increased wear on the belt and pulleys, and the generation of noise and vibrations. Proper tensioner roller alignment helps maintain the belt’s alignment, ensuring smooth operation and minimizing the risk of misalignment-related issues.
3. Reduces Belt Wear and Failure:
Proper tensioner roller alignment helps minimize belt wear and failure. Misalignment can cause the belt to rub against the pulleys or other components, resulting in accelerated wear and damage to the belt. Excessive wear can lead to belt stretching, cracking, or even premature failure. By ensuring proper tensioner roller alignment, the belt remains in its intended position, reducing friction, wear, and the risk of belt failure. This extends the lifespan of the belt and minimizes the need for frequent replacements, resulting in cost savings and improved system reliability.
4. Minimizes Noise and Vibration:
Correct tensioner roller alignment contributes to reduced noise and vibration levels in the belt drive system. Misalignment can cause the belt to oscillate, vibrate, or produce noise as it rubs against the pulleys or other components. These vibrations and noise can be transmitted throughout the system, leading to discomfort, increased wear on components, and a decrease in overall system efficiency. Proper tensioner roller alignment ensures smooth belt operation, minimizing vibrations and noise, and providing a quieter and more comfortable working environment.
5. Improves System Efficiency:
Proper tensioner roller alignment improves the overall efficiency of the belt drive system. Misalignment can result in energy losses due to increased friction, belt slippage, or inefficient power transfer. When the tensioner roller is correctly aligned, it helps maintain optimal belt contact with the pulleys, reducing energy losses and ensuring efficient power transmission. Improved system efficiency leads to reduced energy consumption, increased productivity, and cost savings over the long term.
6. Ensures Reliable Performance:
Tensioner roller alignment is critical for ensuring reliable performance of the belt drive system. Misalignment can lead to unexpected system failures, breakdowns, or unplanned downtime. Proper tensioner roller alignment helps maintain the overall stability and reliability of the system, reducing the risk of sudden failures or disruptions. By ensuring reliable performance, proper tensioner roller alignment contributes to increased productivity, improved operational efficiency, and enhanced system longevity.
7. Facilitates Maintenance and Service:
Proper tensioner roller alignment simplifies maintenance and service tasks. When the tensioner roller is correctly aligned, it is easier to access and adjust, allowing for straightforward tension adjustments or replacement when necessary. Maintenance personnel can quickly identify and address any alignment issues, ensuring that the system remains in optimal working condition. Proper tensioner roller alignment facilitates efficient maintenance practices, reduces downtime during servicing, and enhances the overall serviceability of the belt drive system.
In summary, proper tensioner roller alignment is crucial for the optimal performance, longevity, and reliability of a belt drive system. It ensures optimal belt tension, prevents misalignment, reduces wear on the belt, minimizes noise and vibration, improves system efficiency, and facilitates maintenance and service. By giving due attention to tensioner roller alignment, system operators can maximize the benefits of their belt drive systems and avoid potential issues that can arise from misalignment.
Can tensioner rollers be customized for specific industries or machinery configurations?
Yes, tensioner rollers can be customized to suit specific industries or machinery configurations. The ability to customize tensioner rollers allows for optimal performance and compatibility with unique requirements. Here are some aspects to consider:
1. Size and Dimensions:
Tensioner rollers can be customized to meet specific size and dimensional requirements. This includes variations in diameter, width, and overall dimensions to ensure proper fit and alignment within the machinery or system. Custom sizing ensures that the tensioner roller integrates seamlessly with other components and accommodates the available space constraints.
2. Load Capacity:
Industries and machinery configurations can have varying load capacities based on the application’s demands. Customized tensioner rollers can be designed to handle specific load requirements, ensuring they can support the intended loads without compromising performance or longevity. This customization helps prevent premature wear or failure due to excessive loads.
3. Material Selection:
Tensioner rollers can be customized by selecting materials that are best suited for the specific industry or machinery configuration. Different materials offer varying properties such as strength, durability, resistance to heat, chemicals, or abrasion. Customization allows for the selection of materials that can withstand the unique environmental conditions and operational demands of the application.
4. Coatings and Surface Treatments:
Customization of tensioner rollers also includes the application of coatings or surface treatments to enhance their performance and durability. Coatings such as ceramic, rubber, or Teflon can provide increased wear resistance, reduce friction, and improve the lifespan of the tensioner roller. Customized surface treatments can enhance corrosion resistance or provide specific surface properties required for the application.
5. Mounting and Adjustment Mechanisms:
Tensioner rollers can be customized to incorporate specific mounting and adjustment mechanisms based on the machinery or system configuration. This includes options for adjustable mounting positions, tension adjustment features, or quick-release mechanisms for easy installation, maintenance, and tension adjustments. Customized mounting and adjustment mechanisms ensure optimal functionality and ease of use.
6. Special Features and Accessories:
Depending on the industry or machinery requirements, tensioner rollers can be customized with special features and accessories. These may include additional bearings, seals, or guards to enhance protection, improve performance, or meet specific safety standards. Customized tensioner rollers can also incorporate sensors or monitoring systems to enable condition monitoring and predictive maintenance.
7. Compliance with Industry Standards:
Customized tensioner rollers can be designed to comply with specific industry standards, regulations, or certifications. Industries such as automotive, aerospace, or food processing may have stringent requirements that need to be met. Customization ensures that tensioner rollers meet the necessary standards and provide reliable performance within the specified guidelines.
In summary, tensioner rollers can be customized to suit specific industries or machinery configurations. Customization allows for tailoring the size, load capacity, material selection, coatings, mounting mechanisms, special features, and compliance with industry standards. By customizing tensioner rollers, industries can ensure optimal performance, longevity, and compatibility with their unique requirements.
Can you describe the benefits of using tensioner rollers for optimal belt performance?
Using tensioner rollers in a belt drive system offers several benefits that contribute to optimal belt performance. Here’s a detailed description of the advantages of using tensioner rollers:
1. Maintaining Proper Belt Tension:
Tensioner rollers play a crucial role in maintaining the proper tension of belts within a drive system. They apply the necessary force to keep the belts taut, preventing slack and ensuring optimal power transmission. By maintaining proper tension, tensioner rollers help prevent belt slippage, which can result in the inefficient operation of engine accessories, reduced power output, and increased wear on the belts and other components.
2. Preventing Belt Misalignment:
Tensioner rollers also help prevent belt misalignment. When belts are not properly aligned, they can rub against other components, causing friction and wear. Misalignment can lead to excessive heat generation, noise, and even belt failure. Tensioner rollers, by maintaining the correct tension, help keep the belts aligned and running smoothly, minimizing the risk of misalignment-related issues.
3. Absorbing Belt Vibrations:
Belts in a drive system can experience vibrations due to various factors such as engine operation, load changes, or belt stretch. These vibrations can adversely affect belt performance and increase stress on the system. Tensioner rollers, with their spring-loaded design, help absorb belt vibrations and provide stability to the belt drive system. By dampening vibrations, tensioner rollers contribute to smoother and quieter operation.
4. Compensating for Belt Stretch and Wear:
Over time, belts can stretch or experience wear due to continuous use and exposure to various elements. Tensioner rollers are designed to compensate for belt stretch and wear by automatically adjusting their position. They help maintain the proper tension in the belts, compensating for any elongation or reduction in belt length. This self-adjusting feature ensures consistent belt tension throughout the lifespan of the belts, promoting optimal performance and longevity.
5. Improving Belt Lifespan:
By maintaining proper tension, reducing vibrations, and preventing misalignment, tensioner rollers contribute to the longevity of belts. When belts are under the correct tension and run smoothly, they experience less stress and wear, resulting in an extended lifespan. Using tensioner rollers helps protect the belts from premature failure, reducing the need for frequent belt replacements and minimizing downtime and maintenance costs.
6. Enhancing Overall System Efficiency:
Optimal belt performance achieved through the use of tensioner rollers translates into improved system efficiency. When belts are properly tensioned and aligned, power transmission between the engine and various accessories or components becomes more efficient. This can result in enhanced overall system performance, improved fuel efficiency, and reduced energy losses, leading to cost savings and better utilization of resources.
7. Simplifying Maintenance:
Tensioner rollers can simplify maintenance tasks in belt drive systems. Their self-adjusting capabilities reduce the need for frequent manual adjustments to maintain proper tension. Additionally, tensioner rollers are often equipped with visual indicators or markings that allow for easy inspection of their condition. This simplifies maintenance checks, making it easier to identify worn or damaged tensioner rollers and replace them promptly, ensuring the continued optimal performance of the belt drive system.
In summary, using tensioner rollers in a belt drive system offers numerous benefits for optimal belt performance. These include maintaining proper belt tension, preventing misalignment, absorbing vibrations, compensating for belt stretch and wear, improving belt lifespan, enhancing overall system efficiency, and simplifying maintenance. Incorporating tensioner rollers into a belt drive system is essential for maximizing performance, minimizing downtime, and ensuring reliable operation of the system.
editor by CX 2024-01-30
China factory Auto Parts Bearing Motorcycle Parts Bearing Car Accessories Bearing Auto Spare Part Bearing Spare Parts Bearing Engine Parts Bearing Wheel Bearing Taper Roller
Product Description
Product Description
E-ASIA Bearing ,The rolling element of bearing is taper roller, cone roller bearing inner circle has tapered roller.Conical extension all the to the same point on the axis bearing, tapered roller bearings belong to the body bearing, our company can according to customer’s special requirements, and design production, can provide a metric system size and non-standard bearings.
Tapered roller bearing can be a direction under high load, radial and axial practical in low and middle speed aspect, we are able to offer the following range of bearings: single row, double row, four column type, precision for PO and level P6.
| Name: | 1688 Factory Rolamentos Rodamientos Rulman Single Row 32305 32303 11749 44649 11949 Auto Automotive Wheel Hub Metric Inch Taper Tapered Roller Bearing |
| Model No. | 32305 32303 11749 44649 11949 |
| Type: | Tapered Roller Bearing/Taper Roller Bearing |
| Weight: | Standard weight |
| Specifications: | Standard size |
| Material: | Chrome steel GCR-15 |
| CAGE: | Steel Cage and Nylon Cage |
| Rolling body: | Roller |
Features and Benefits:
1. Low friction and running temperatures, low noise, and vibration
2. High running speeds
3. High quality and performance capabilities for your application
4. Accommodate radial loads and axial loads in both directions
5. Available with a variety of greases for most conditions, including food quality grease, high-temperature grease, and CHINAMFG Oil
6. Increased reliability and provide long bearing and lubricant service life
Product Parameters
| Our Main products | ||
| 1.Chassic Parts | Bearings | Clutch Release Bearings |
| Tensioner Bearings/Pivot shaft | ||
| wheel bearings | ||
| Wheel Hub Units | ||
| Suspension Parts | Shock Absorber | |
| universal Joint/ universal Joint | ||
| Half Shaft | ||
| Steering parts | Steering Pump | |
| Steering Gear | ||
| 2.Clutch&Braking Systerm | Clucth Cylinders | Clutch Master Cylinders |
| Clutch Slave Cyllinders | ||
| Brake Cylinders | Brake Master Cylinders | |
| Brake Slave Cylinders | ||
| 3.Electric Parts | Ignition systems | ignition coils |
| ignition wire set | ||
| Spark Plug | ||
| Exhaust system | Exhaust gas recirculation control valve | |
| EGR(exhaust gas recirculation)valve | ||
| Air flow meter | ||
| Electronic fuel injection system components | Oxygen sensor | |
| Electric throttle position sensor | ||
| Fuel Pump | ||
| fuel injector Nozzle | ||
| air flow sensor | ||
| Crankshaft position sensor | ||
| Camshaft location sensor | ||
| Idle speed switch | ||
| Detonation sensor | ||
| fuel Pressure sensor | ||
| Fan resistance | ||
Same Series Bearings We Offer:
| 80571AC | 566425.H195 | VKBA5423 |
| 581079AC | 566426.H195 | VKBA5424 |
| 85715AC | 566427.H195 | VKBA5425 |
| 85710B | 566283.H195 | VKBA5314 |
| 85710.07 | 566074.H195 | VKBA5316 |
| 805092C | 566834.H195 | VKBA5408 |
| 85714A | 566830.H195 | VKBA5409 |
| 85714.26 | 57571.H195 | VKBA5377 |
| 805092.07 | 568968.H195 | VKBA5379 |
| 805003A.H195 | 571762.H195 | VKBA5549 |
| 85718 | 566834.H195 | VKBA5412 |
| 85712 | 564734.H195 | VKBA5415 |
| 805415 | 572813A | BTH-0571 |
| 801400 | 567549 | BTH-0018 |
| 801794B | 528983A | BTH-0571 |
| 801974A.H195 | 528983B | BTH-0053 |
| 85712A | 534565 | BTH-0055 |
| 85713 | 528946 | BTH-0068 |
| 803628 | 568879 | BTH-0072 |
| 805011C | 543562 | BTH-0073 |
| 805248 | 538971 | BTH-0074 |
| 801961.15 | 85713 | BTH-0087 |
| 805008.08 | BTH-0084 | |
| BTH-0822 |
Our Advantages
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
FAQ
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Customized: | Non-Customized |
|---|---|
| Standard Parts: | Yes |
| Universal: | Yes |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do electronic or computer-controlled tensioner rollers enhance belt system performance?
Electronic or computer-controlled tensioner rollers offer advanced features and capabilities that enhance the performance of belt systems in vehicles. These innovative tensioner rollers utilize electronic sensors, actuators, and control algorithms to optimize tension, alignment, and overall operation. Here’s a detailed explanation of how electronic or computer-controlled tensioner rollers enhance belt system performance:
1. Real-Time Tension Control:
Electronic tensioner rollers continuously monitor the tension in the belt and can adjust it in real-time. Using sensors and feedback mechanisms, these tensioner rollers measure the tension and communicate with the control unit to make precise adjustments. Real-time tension control ensures that the belt remains within the optimal tension range, minimizing the risk of slippage or excessive tension that could lead to premature wear or belt failure.
2. Adaptive Belt Alignment:
Computer-controlled tensioner rollers can also monitor and adjust the alignment of the belt. By analyzing sensor data and using actuators, these tensioner rollers can make small adjustments to correct any misalignment. Adaptive belt alignment helps ensure that the belt remains properly aligned with the pulleys, reducing wear, noise, and power losses associated with misalignment. It contributes to improved belt system performance and longevity.
3. Load Compensation:
Electronic tensioner rollers can dynamically adjust the tension based on the load or operating conditions. By analyzing inputs from various sensors, such as engine load, temperature, or accessory demands, these tensioner rollers can adapt the tension to optimize performance and efficiency. Load compensation ensures that the belt system operates optimally under different load scenarios, enhancing overall drivability and preventing belt-related issues.
4. Integrated Belt Health Monitoring:
Some electronic tensioner rollers feature integrated belt health monitoring capabilities. They utilize sensors to measure parameters such as belt wear, temperature, or vibration. By continuously monitoring the belt’s condition, these tensioner rollers can provide early warning signs of potential belt failures or maintenance needs. Integrated belt health monitoring helps prevent unexpected belt failures, improve maintenance planning, and optimize the performance and reliability of the belt system.
5. Diagnostic Capabilities:
Electronic or computer-controlled tensioner rollers often have diagnostic capabilities that can communicate with the vehicle’s onboard computer system. They can provide diagnostic information, fault codes, or performance data, allowing technicians to troubleshoot and address belt system issues more efficiently. Diagnostic capabilities contribute to quicker and more accurate diagnosis, reducing downtime, and improving overall belt system performance.
6. System Integration:
Electronic tensioner rollers can be integrated into the vehicle’s overall electronic control system. They can communicate and coordinate with other components, such as the engine management system or accessory controllers. This integration allows for optimized operation and coordination between the belt system and other vehicle systems, improving drivability, efficiency, and performance.
7. Advanced Control Algorithms:
Computer-controlled tensioner rollers employ advanced control algorithms to optimize tension, alignment, and other parameters. These algorithms take into account various inputs, such as engine speed, load, temperature, and system requirements, to determine the optimal operating conditions for the belt system. The use of advanced control algorithms ensures precise and efficient operation, contributing to enhanced belt system performance.
In summary, electronic or computer-controlled tensioner rollers enhance belt system performance by providing real-time tension control, adaptive belt alignment, load compensation, integrated belt health monitoring, diagnostic capabilities, system integration, and advanced control algorithms. These features optimize the operation of the belt system, improve drivability, reduce maintenance needs, and enhance the overall performance and reliability of the vehicle’s belt-driven systems.
What factors should be considered when selecting tensioner rollers for different industrial applications?
When selecting tensioner rollers for different industrial applications, several factors need to be taken into consideration. These factors include:
1. Load and Tension Requirements:
The load and tension requirements of the specific industrial application are crucial factors to consider. It is important to determine the maximum load the tensioner roller will experience and the required tension for proper belt operation. This information helps in selecting a tensioner roller that can handle the anticipated loads and provide the necessary tension to prevent belt slippage or excessive wear.
2. Belt Type and Size:
The type and size of the belt being used in the industrial application are important considerations. Different belts have varying characteristics, such as width, thickness, and tooth profile. It is essential to choose a tensioner roller that is compatible with the specific belt type and size to ensure proper fit, alignment, and tension distribution.
3. Operating Speed:
The operating speed of the industrial application is a critical factor when selecting tensioner rollers. High-speed applications generate centrifugal forces that can impact belt tension and introduce vibrations. Tensioner rollers designed for high-speed applications are typically equipped with features to absorb vibrations and maintain consistent tension, ensuring reliable power transmission at elevated speeds.
4. Environmental Conditions:
The environmental conditions in which the tensioner roller will operate should be considered. Factors such as temperature extremes, humidity, dust, dirt, chemicals, and exposure to moisture or corrosive substances can affect the performance and durability of the tensioner roller. Selecting a tensioner roller with appropriate materials and protective coatings ensures its reliability and longevity in the specific environmental conditions.
5. Alignment and Adjustment Mechanism:
The alignment and adjustment mechanism of the tensioner roller play a crucial role in maintaining proper belt tension. Consider the ease of installation, adjustment, and alignment when selecting a tensioner roller. Look for features such as adjustable mounting positions, tension adjustment mechanisms, and reliable locking mechanisms that facilitate easy and precise tension adjustment and alignment of the belt.
6. Maintenance and Serviceability:
The maintenance and serviceability aspects of the tensioner roller should be taken into account. Evaluate the accessibility of the tensioner roller for inspection, lubrication, and maintenance tasks. Choose a tensioner roller that allows for easy replacement of worn or damaged components, minimizing downtime and maintenance costs in the industrial application.
7. Compatibility with the System:
Ensure that the tensioner roller is compatible with the overall belt drive system and other components in the industrial application. Consider factors such as the mounting arrangement, space constraints, and integration with other system elements. Compatibility ensures proper fit, functionality, and overall system performance.
8. Industry Standards and Regulations:
Complying with industry standards and regulations is essential when selecting tensioner rollers for industrial applications. Consider any specific requirements or guidelines set by relevant regulatory bodies or industry associations. Adhering to these standards helps ensure safety, reliability, and compliance with applicable regulations.
In summary, when selecting tensioner rollers for different industrial applications, it is important to consider factors such as load and tension requirements, belt type and size, operating speed, environmental conditions, alignment and adjustment mechanism, maintenance and serviceability, compatibility with the system, and adherence to industry standards and regulations. Considering these factors ensures the appropriate selection of tensioner rollers that will effectively support the belt drive system and optimize the performance and reliability of the industrial application.
Can you describe the benefits of using tensioner rollers for optimal belt performance?
Using tensioner rollers in a belt drive system offers several benefits that contribute to optimal belt performance. Here’s a detailed description of the advantages of using tensioner rollers:
1. Maintaining Proper Belt Tension:
Tensioner rollers play a crucial role in maintaining the proper tension of belts within a drive system. They apply the necessary force to keep the belts taut, preventing slack and ensuring optimal power transmission. By maintaining proper tension, tensioner rollers help prevent belt slippage, which can result in the inefficient operation of engine accessories, reduced power output, and increased wear on the belts and other components.
2. Preventing Belt Misalignment:
Tensioner rollers also help prevent belt misalignment. When belts are not properly aligned, they can rub against other components, causing friction and wear. Misalignment can lead to excessive heat generation, noise, and even belt failure. Tensioner rollers, by maintaining the correct tension, help keep the belts aligned and running smoothly, minimizing the risk of misalignment-related issues.
3. Absorbing Belt Vibrations:
Belts in a drive system can experience vibrations due to various factors such as engine operation, load changes, or belt stretch. These vibrations can adversely affect belt performance and increase stress on the system. Tensioner rollers, with their spring-loaded design, help absorb belt vibrations and provide stability to the belt drive system. By dampening vibrations, tensioner rollers contribute to smoother and quieter operation.
4. Compensating for Belt Stretch and Wear:
Over time, belts can stretch or experience wear due to continuous use and exposure to various elements. Tensioner rollers are designed to compensate for belt stretch and wear by automatically adjusting their position. They help maintain the proper tension in the belts, compensating for any elongation or reduction in belt length. This self-adjusting feature ensures consistent belt tension throughout the lifespan of the belts, promoting optimal performance and longevity.
5. Improving Belt Lifespan:
By maintaining proper tension, reducing vibrations, and preventing misalignment, tensioner rollers contribute to the longevity of belts. When belts are under the correct tension and run smoothly, they experience less stress and wear, resulting in an extended lifespan. Using tensioner rollers helps protect the belts from premature failure, reducing the need for frequent belt replacements and minimizing downtime and maintenance costs.
6. Enhancing Overall System Efficiency:
Optimal belt performance achieved through the use of tensioner rollers translates into improved system efficiency. When belts are properly tensioned and aligned, power transmission between the engine and various accessories or components becomes more efficient. This can result in enhanced overall system performance, improved fuel efficiency, and reduced energy losses, leading to cost savings and better utilization of resources.
7. Simplifying Maintenance:
Tensioner rollers can simplify maintenance tasks in belt drive systems. Their self-adjusting capabilities reduce the need for frequent manual adjustments to maintain proper tension. Additionally, tensioner rollers are often equipped with visual indicators or markings that allow for easy inspection of their condition. This simplifies maintenance checks, making it easier to identify worn or damaged tensioner rollers and replace them promptly, ensuring the continued optimal performance of the belt drive system.
In summary, using tensioner rollers in a belt drive system offers numerous benefits for optimal belt performance. These include maintaining proper belt tension, preventing misalignment, absorbing vibrations, compensating for belt stretch and wear, improving belt lifespan, enhancing overall system efficiency, and simplifying maintenance. Incorporating tensioner rollers into a belt drive system is essential for maximizing performance, minimizing downtime, and ensuring reliable operation of the system.
editor by CX 2023-12-19
China Best Sales CZPT China Mcgill Bearings Manufacturers Auto Spare Parts Tensioner Assy OEM 31170p8AA01 Accord 19982002for Honda32330 Double Taper Roller Bearing near me shop
Product Description
HangZhou CZPT CO., LTD
Factory Add: Pannan Village, Panzhuang Town, HangZhou City, HangZhou City, ZheJiang Province, China
Main Products:
*Deep Groove Ball Bearing
*Self-Aligning Ball Bearing
*Cylindrical Roller Bearings
*Spherical Roller Bearing
*Angular Contact Ball Bearings
*Tapered Roller Bearings
*Thrust Ball Bearing
*Thrust Roller Bearing
*Spherical Bearings
*Thin-Walled Bearings
*Miniature Bearings
*Needle Bearing
XINHUO BEARING CHINA MCGILL BEARINGS MANUFACTURERS AUTO SPARE PARTS TENSIONER ASSY OEM 31170P8AA01 ACCORD 19982002FOR HONDA32330 DOUBLE TAPER ROLLER BEARING
Product Description
|
Product Name |
Tapered Roller Bearing |
|
Type |
Tapered Roller Bearing |
|
Structure |
Tapered roller, retainer, inner and outer ring tapered |
|
Applicable Industries |
Building materials workshop, construction engineering, machinery maintenance workshop, retail, manufacturing plant, motor, |
|
Brand Name |
XINHUO/RPZ/XWFD |
|
Size |
20mm-500mm |
|
Accuracy Class |
P6,P0,P4,P5 |
|
Seal Type |
open / rubber seal |
|
Seal Number of Rows |
Single row / Double row / Four-row |
|
Origin |
ZheJiang , China |
|
Retainer |
Steel, Brass |
|
Material |
GCr15 |
|
Service |
OEM / ODM |
|
Features |
Long-life High Speed |
| Tapered Roller Bearing | |||||
| 35713 | 30302 | 32205 | 7718 | 32005 | 31306 |
| 35714 | 30303 | 32206 | 27616 | 32006 | 31307 |
| 35715 | 30304 | 32207 | 27606 | 32007 | 31308 |
| 35716 | 30305 | 32208 | 27607 | 32008 | 31309 |
| 35717 | 30306 | 32209 | 57707 | 32009 | 31310 |
| 35718 | 30307 | 32210 | 27613 | 32571 | 31311 |
| 35719 | 30308 | 32211 | 7804 | 32011 | 31312 |
| 35710 | 30309 | 32212 | 7805 | 32012 | 31313 |
| 35711 | 3571 | 6-7512 | 7806 | 32013 | 31314 |
| 35712 | 3571 | 32213 | 7807 | 32014 | 31315 |
| 35713 | 3571 | 32214 | 7809 | 32015 | 30309X2B |
| 35714 | 3571 | 32215 | 807813 | 32016 | 30611B |
| 35715 | 3571 | 32216 | 7815 | 32017 | 30613B |
| 35716 | 3571 | 32217 | 7816 | 32018 | |
| 35717 | 3 0571 | 32218 | 7819 | 32019 | 305715 |
| 35718 | 3 0571 | 32219 | 717813(390A) | 32571 | 305716 |
| 35719 | 3 0571 | 32220 | 7909 | 32571 | 305717 |
| 35710 | 3571 | 32221 | 7724 | 32571 | 305718 |
| 35711 | 30320 | 32222 | 7723 | 32571 | 305719 |
| 35712 | 30322 | 32224 | 7705 | 32026 | 35710 |
| 35714 | 30324 | 32226 | 7706 | 32571 | 35711 |
| 35716 | 30326 | 32228 | 7707 | 32030 | 35712 |
| 35718 | 30328 | 32230 | 27310 | 32032 | 35713 |
| 35710 | 30330 | 32232 | 27312 | 32034 | 35714 |
| 35712 | 30332 | 32234 | 27313 | 32036 | 35715 |
| 35714 | 30334 | 32236 | 27911 | 32038 | 35716 |
| 35716 | 32238 | 32040 | 35717 | ||
| 35718 | 32240 | 30 0571 8 | 32044 | 35718 | |
| 35710 | 3007205 | 32244 | 30 0571 9 | 32048 | 35719 |
| 35714 | 3007206 | 32248 | 305710 | 32052 | 30 0571 0 |
| 3007207 | 32252 | 305711 | 30 0571 1 | ||
| 3007208 | 32209XB2 | 305712 | 30 0571 2 | ||
| 3007209 | 32304 | 305713 | 30 0571 4 | ||
| 3007210 | 32305 | 305714 | 30 0571 6 | ||
| 3007211 | 32306 | 305715 | 30 0571 8 | ||
| 30571 | 32307 | 305716 | 30 0571 0 | ||
| 3007213 | 32308 | 305717 | |||
| 3007214 | 32309 | 305718 | |||
| 3007215 | 32310 | 305719 | |||
| 3007216 | 32311 | 305710 | |||
| 3007217 | 32312 | 305711 | |||
| 3007218 | 32313 | 305712 | |||
| 3007219 | 32314 | 305714 | |||
| 30 0571 0 | 32315 | ||||
| 30 0571 1 | 32316 | ||||
| 32317 | |||||
| 32318 | |||||
| 32319 | |||||
| 32320 | |||||
| 32321 | |||||
| 32322 | |||||
| 32324 | |||||
| 32326 | |||||
| 32328 | |||||
| 32330 | |||||
| 32332 | |||||
| 32334 | |||||
| 32336 | |||||
| 32338 | |||||
FAQ
Q1:What is your Before-sales Service?
1>. Offer to bear related consultation about technology and application;
2>.Help customers with bearing choice, clearance configuration, products” life and reliability analysis;
3>. Offer highly cost-effective and complete solution program according to site conditions;
4>. Offer localized program on introduced equipment to save running cost
Q2: What is your After-sales Service?
1>. Offer training about bearing installation and maintenance;
2>.Help customers with trouble diagnosis and failure analysis;
3>. Visit customers regularly and feedback their rational suggestions and requirements to the company.
Q3: How about your company’s strength?
1>.FREE SAMPLES:
contact us by email or trade manager, we will send the free samples according to your request.
2>. World-Class Bearing:
We provide our customers with all types of indigenous roller bearings with world-class quality.
3>.OEM or Non-Stand Bearings:
Any requirement for Nonstandard roller bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
4>.Genuine products With Excellent Quality:
The company has always proved the 100% quality products it provides with genuine intent.
5>. After Sales Service and Technical Assistance:
The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
6>.Quick Delivery:
The company provides just-in-time delivery with its streamlined supply chain.
7>.Cost Saving:
We provide long-life, shock-resistant, and high-reliability roller bearings with excellent quality and better performance.
Resulting in increased cost savings.
Q4: What will we do if you are not satisfied with the product?
A: If have any abnormal, Please contact us at the first time, we will immediately process
Q5: How long will you respond to our problems?
A: We will respond within 1 hour. 24 hours to solve your problem
Q6: Is optional lubrication provided?
A: We can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical
assistance with any special requirements
What Is a V-Belt?
A v-belt is a type of belt that provides a continuous motion to the vehicle’s wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections – cushion rubber and compression rubber.
Link-type V-belt
A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven.
Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled.
The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive’s load-carrying capacity.
Classical V-belt
A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors.
The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt’s outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers.
Typically, classical V-belts are used in single-belt drives. Because they don’t require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.
Narrow V-belt
The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter “v” on the top side and a length of outside dimensions of 1.6:1.
The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt.
For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.
Banded belt
Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement.
Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band’s flexural strength and shock resistance. It’s sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength.
The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt.
Banded v-belts are popular with commercial applications. Whether you’re looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!
Traditional V-belt
Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions.
TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt’s lifespan is greatly increased because of this feature.
A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.
Metric V-belt
Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.
Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch.
Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.
China factory CZPT Bearing China Tensioner Bearing Manufacturers 30217/Original Taper Roller Bearing 32210 32211 32212 32212 32214 32215 Self Aligning Roller Bearing wholesaler
Product Description
HangZhou CZPT Import and Export Co., Ltd.
Factory Add: 801 -827 -129, Floor 8, Building 6, No. 166 ZHangZhou Middle Road, CHangZhou District, ZheJiang Province (Centralized Office Area), HangZhou, ZheJiang , China
Main Products:
*Deep Groove Ball Bearing
*Self-Aligning Ball Bearing
*Cylindrical Roller Bearings
*Spherical Roller Bearing
*Angular Contact Ball Bearings
*Tapered Roller Bearings
*Thrust Ball Bearing
*Thrust Roller Bearing
*Spherical Bearings
*Thin-Walled Bearings
*Miniature Bearings
*Needle Bearing
*Ceramic Bearing
ZXIHU (WEST LAKE) DIS.AO BEARING CHINA TENSIONER BEARING MANUFACTURERS 35717/ORIGINAL TAPER ROLLER BEARING 32210 32211 32212 32212 32214 32215 SELF ALIGNING ROLLER BEARING
Product Description
|
Product Name |
Tapered Roller Bearing |
|
Type |
Tapered Roller Bearing |
|
Structure |
Tapered roller, retainer, inner and outer ring tapered |
|
Applicable Industries |
Building materials workshop, construction engineering, machinery maintenance workshop, retail, manufacturing plant, motor, |
|
Brand Name |
ZXIHU (WEST LAKE) DIS.AO/RPZ/XWFD |
|
Size |
20mm-500mm |
|
Accuracy Class |
P6,P0,P4,P5 |
|
Seal Type |
open / rubber seal |
|
Seal Number of Rows |
Single row / Double row / Four-row |
|
Origin |
ZheJiang , China |
|
Retainer |
Steel, Brass |
|
Material |
GCr15 |
|
Service |
OEM / ODM |
|
Features |
Long-life High Speed |
| Tapered Roller Bearing | |||||
| 35713 | 30302 | 32205 | 7718 | 32005 | 31306 |
| 35714 | 30303 | 32206 | 27616 | 32006 | 31307 |
| 35715 | 30304 | 32207 | 27606 | 32007 | 31308 |
| 35716 | 30305 | 32208 | 27607 | 32008 | 31309 |
| 35717 | 30306 | 32209 | 57707 | 32009 | 31310 |
| 35718 | 30307 | 32210 | 27613 | 32571 | 31311 |
| 35719 | 30308 | 32211 | 7804 | 32011 | 31312 |
| 35710 | 30309 | 32212 | 7805 | 32012 | 31313 |
| 35711 | 3571 | 6-7512 | 7806 | 32013 | 31314 |
| 35712 | 3571 | 32213 | 7807 | 32014 | 31315 |
| 35713 | 3571 | 32214 | 7809 | 32015 | 30309X2B |
| 35714 | 3571 | 32215 | 807813 | 32016 | 30611B |
| 35715 | 3571 | 32216 | 7815 | 32017 | 30613B |
| 35716 | 3571 | 32217 | 7816 | 32018 | |
| 35717 | 3 0571 | 32218 | 7819 | 32019 | 305715 |
| 35718 | 3 0571 | 32219 | 717813(390A) | 32571 | 305716 |
| 35719 | 3 0571 | 32220 | 7909 | 32571 | 305717 |
| 35710 | 3571 | 32221 | 7724 | 32571 | 305718 |
| 35711 | 30320 | 32222 | 7723 | 32571 | 305719 |
| 35712 | 30322 | 32224 | 7705 | 32026 | 35710 |
| 35714 | 30324 | 32226 | 7706 | 32571 | 35711 |
| 35716 | 30326 | 32228 | 7707 | 32030 | 35712 |
| 35718 | 30328 | 32230 | 27310 | 32032 | 35713 |
| 35710 | 30330 | 32232 | 27312 | 32034 | 35714 |
| 35712 | 30332 | 32234 | 27313 | 32036 | 35715 |
| 35714 | 30334 | 32236 | 27911 | 32038 | 35716 |
| 35716 | 32238 | 32040 | 35717 | ||
| 35718 | 32240 | 30 0571 8 | 32044 | 35718 | |
| 35710 | 3007205 | 32244 | 30 0571 9 | 32048 | 35719 |
| 35714 | 3007206 | 32248 | 305710 | 32052 | 30 0571 0 |
| 3007207 | 32252 | 305711 | 30 0571 1 | ||
| 3007208 | 32209XB2 | 305712 | 30 0571 2 | ||
| 3007209 | 32304 | 305713 | 30 0571 4 | ||
| 3007210 | 32305 | 305714 | 30 0571 6 | ||
| 3007211 | 32306 | 305715 | 30 0571 8 | ||
| 30571 | 32307 | 305716 | 30 0571 0 | ||
| 3007213 | 32308 | 305717 | |||
| 3007214 | 32309 | 305718 | |||
| 3007215 | 32310 | 305719 | |||
| 3007216 | 32311 | 305710 | |||
| 3007217 | 32312 | 305711 | |||
| 3007218 | 32313 | 305712 | |||
| 3007219 | 32314 | 305714 | |||
| 30 0571 0 | 32315 | ||||
| 30 0571 1 | 32316 | ||||
| 32317 | |||||
| 32318 | |||||
| 32319 | |||||
| 32320 | |||||
| 32321 | |||||
| 32322 | |||||
| 32324 | |||||
| 32326 | |||||
| 32328 | |||||
| 32330 | |||||
| 32332 | |||||
| 32334 | |||||
| 32336 | |||||
| 32338 | |||||
FAQ
Q1:What is your Before-sales Service?
1>. Offer to bear related consultation about technology and application;
2>.Help customers with bearing choice, clearance configuration, products” life and reliability analysis;
3>. Offer highly cost-effective and complete solution program according to site conditions;
4>. Offer localized program on introduced equipment to save running cost
Q2: What is your After-sales Service?
1>. Offer training about bearing installation and maintenance;
2>.Help customers with trouble diagnosis and failure analysis;
3>. Visit customers regularly and feedback their rational suggestions and requirements to the company.
Q3: How about your company’s strength?
1>.FREE SAMPLES:
contact us by email or trade manager, we will send the free samples according to your request.
2>. World-Class Bearing:
We provide our customers with all types of indigenous roller bearings with world-class quality.
3>.OEM or Non-Stand Bearings:
Any requirement for Nonstandard roller bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
4>.Genuine products With Excellent Quality:
The company has always proved the 100% quality products it provides with genuine intent.
5>. After Sales Service and Technical Assistance:
The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
6>.Quick Delivery:
The company provides just-in-time delivery with its streamlined supply chain.
7>.Cost Saving:
We provide long-life, shock-resistant, and high-reliability roller bearings with excellent quality and better performance.
Resulting in increased cost savings.
Q4: What will we do if you are not satisfied with the product?
A: If have any abnormal, Please contact us at the first time, we will immediately process
Q5: How long will you respond to our problems?
A: We will respond within 1 hour. 24 hours to solve your problem
Q6: Is optional lubrication provided?
A: We can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical
assistance with any special requirements
Choosing a V-Belt
When choosing a v-belt, you should understand the characteristics of each type and how they affect the performance of your machine. Listed below are the characteristics of Cogged, Narrow profile, and wide v-belts. Learn about the advantages and disadvantages of each. Choose the right v-belt for your machine to maximize its performance. Learn about the different materials used to make v-belts and how they influence the performance of your machine.
Narrow v-belts
While the flat belts are the most common type of v-belt, narrow v-belts are also a common option for industrial applications. These belts are similar to wedge belts in that they transmit heavier loads, but in a smaller form. Narrow v-belts are typically designated as 3V, 5V, and 8V and are denoted by their top width, multiplied by an eighth of an inch. Narrow v-belt sections conform to a wedge belt profile and are usually standardized by manufacturers. For example, section 3V corresponds to a wedge-type profile, while section 5V corresponds to SPB.
Both narrow and conventional v-belts are made of rubber stocks, which are generally composed of polymer or synthetic rubber. Fabric materials may be used to cover the stock material, adding a layer of reinforcement and protection. Narrow v-belts have a higher power rating than traditional V-belts. This is due to their greater depth-to-width ratio, which puts more of the reinforcing cord beneath the sheave.
The Wedge TLP ™ Narrow V-belt from Continental features a homogeneous one-piece design for maximum strength and long-term performance. These belts feature a high-denier cord and can handle significant horsepower increases. These belts are ideal for industrial applications. However, they are not as durable as their wider counterparts. The Wedge TLP is also an excellent choice for heavy-duty industrial applications.
Cogged v-belts
A key benefit of cogged v-belts is their ability to increase power output without sacrificing reliability. These belts are designed with precision-engineered cogs, which allow them to fit into smaller pulleys without reducing power output. Their raw-edge sidewalls and specially formulated EPDM rubber compound also help provide grip power. Cogged v-belts are manufactured by Carlisle(r) and offer several advantages over conventional belts.
The performance benefits of Cogged V-Belts are widely acknowledged. The company uses added-strength EPDM compounds in their belts to help reduce downtime and energy consumption. They are ideal for demanding applications such as power transmission. These belts are available in a variety of sizes and cross-sections. The section number of Cogged v-belts is H3V, H4V, and H5V.
The main difference between cogged v-belts and wedge belts is in the contact angle. While wedge and cogged v-belts have the same contact angle, the design and construction differs. Cogged v-belts typically include top and bottom layers of rubber, dampening rubber, tension cords, and top and bottom metal rings. Polychloroprene and polyester cords are common materials for the top and bottom layers, while aramid fibers are used for punishing applications.
Cogged v-belts are more flexible than traditional v-belts. Because of the slots on the belt surface, they reduce bending resistance. They are compatible with the same pulleys as standard v-belts, and run cooler and longer. They are also more efficient than standard V-belts. If you are considering a cogged V-belt for your application, it may be worth it to investigate the benefits of this belt type.
Wide v-belts
Variable-speed v-belts are wider in cross section than classical v-belts. The design of variable-speed v-belts varies depending on the manufacturer, but generally features a parallel top and bottom surface. This type of v-belt wedges tightly into its pulley’s grooves, reducing power loss and slippage. This type of v-belt is best suited to applications where speed changes frequently.
High-performance Wide V-belts feature a fibre-reinforced EPDM rubber base. The resulting supercharged EPDM mix is better suited for applications where the belts are subject to higher temperatures. This type of drive belt can also replace existing drives with ease and efficiency. CZPT offers a wide range of drive belts for all applications. For applications where slack is an issue, wrapped V-belts are a smart choice.
Narrow-V-belts, on the other hand, have a more favorable height-to-width ratio. This means that a narrow-V belt can be smaller while still providing the same power transmission. These belts also have a lower mass, which reduces centrifugal forces and enables higher speeds. However, narrow-V-belts are prone to wear, but are still a popular choice in many applications.
In addition to being more durable, wrapped-V-belts have fabric-coated edges for better heat resistance. The material covering wrapped-V-belts also protects them from damage from friction and external contaminants. Unlike their rigid counterparts, these wide-V-belts have an improved lifespan and require less maintenance and downtime. These are excellent alternatives to conventional v-belts. So, what are the benefits of Wide-V-belts?
Narrow profile v-belts
When it comes to choosing the best V-belt for your needs, it is important to understand the differences between narrow profile and classical. Narrow profile V-belts are generally narrower in cross-section than classical v-belts. This makes them ideal for high-speed compact drives and light-duty applications. The following section details the differences between narrow and classical v-belts.
The tensile cords, or “cords,” are embedded into the rubber compound. These cords are the main power-transmitting component of a narrow profile v-belt. The tension cords are located at the pitch diameter of the belt cross-section and increase the tensile strength. They are typically made of steel, aramid fibers, or polyester. The core is usually made of polyurethane, but other materials can be used.
When measuring the v-belt’s width, it is important to understand the various sign-codes. Some v-belts have the wrong sign-coding schema. For example, a classical profile belt should be read as Lw = 3522 mm, while a narrow profile belt should be read as La=3553mm. A narrow profile v-belt has a steeper side-wall, which increases the wedging action. Moreover, the narrow profile v-belt has higher load capacity.
Despite their name, narrow profile v-belts are the most widely used and versatile type of v-belts. They are also the easiest to install. Their general size is similar to that of a wedge, and their number is derived from their numerical prefix. A narrow profile v-belt with a 3L300 part number is 3/8″ wide and 300.0 inches long.
Wide profile v-belts
Wide profile v-belts are designed for heavy-duty applications where extreme performance is required. They are ideal for such applications due to their high-flexural strength and shock-resistance. They also come with many benefits, including good noise-reduction, increased sturdiness, and easy maintenance. This article explores the features of wide profile v-belts and how they can benefit your business.
Classical v-belts have an internal dimensional metric marking called the “CZPT.” This identifies each specific belt. Generally, this number is a combination of the normal profile size designation letter and the internal length in inches. The inside length of the v-belt is indicated on the index of the v-belt. To begin installing the v-belt, mark the floor where it will be hung. Tape the end stop marker to the first stick.
Narrow v-belts are narrower than standard wide v-belts. They are also available in raw-edge cogged profiles and are intended for light-duty applications. Narrow V-belts are also available in 4 sizes. Compared to standard wide profile v-belts, narrow v-belts are most appropriate for high-speed, compact drives. However, wide profile v-belts are generally longer than narrow V-belts.
A v-belt is composed of different types of rubber and reinforcements. It undergoes tensile and compressive stresses on both sides. The top side of a v-belt experiences longitudinal tensile force, while the bottom side is subjected to compression against a pulley. Moreover, the included angle of a v-belt section is 40 deg. Various types of v-belts are available according to their cross-sections and performance specifications.
Standard v-belts
If you are installing v-belts, you must know the right way to measure them. Many v-belts are mislabelled as classic or SPA. If you are unsure of which 1 to choose, you can refer to the standard v-belts index. The basic way to measure v-belts is by using a measuring tape or a cable tie. Using the right technique will ensure you get the right length.
A well-engineered V-belt is made from an elastomer core, which is a material that is resistant to abrasion. The elastomer core is usually composed of polyurethane, which has excellent flexural strength and shock resistance. In addition to the elastomer core, a fabric cover protects the core from wear and environmental forces. Its fabric cover is treated to form a chemical bond with the belt core, which increases the fabric’s resistance to constant bending.
The cross-section of a standard V-belt is commonly described as a trapezium, with its top and bottom sides parallel. Knowing the cross-section of a standard V-belt is essential in matching it with a pulley. It is also important to know how the v-belt is positioned on a pulley and how to select the right belt for the job.