What maintenance practices are recommended for tensioner rollers to ensure optimal performance?

Maintaining proper maintenance practices for tensioner rollers is crucial to ensure their optimal performance and longevity. Regular maintenance helps prevent issues such as premature wear, misalignment, and reduced efficiency. Here are some recommended maintenance practices for tensioner rollers:

1. Visual Inspection:

Perform regular visual inspections of the tensioner rollers to check for any signs of wear, damage, or misalignment. Look for cracks, excessive wear, or deformation in the roller surface, as well as any loose or damaged components. Visual inspections can help identify potential issues early on and allow for timely maintenance or replacement.

2. Lubrication:

Check the lubrication requirements of the tensioner rollers and ensure they are properly lubricated according to the manufacturer’s recommendations. Lubrication helps reduce friction and wear, ensuring smooth operation and optimal performance. Use the appropriate lubricant specified by the manufacturer and follow the recommended intervals for lubrication maintenance.

3. Tension Adjustment:

Regularly check the tension of the belt and adjust it as necessary. Tensioner rollers often have mechanisms that allow for tension adjustment. Follow the manufacturer’s guidelines to ensure the belt is properly tensioned within the recommended range. Incorrect tension can lead to belt slippage, reduced power transmission efficiency, and premature wear of the belt and tensioner rollers.

4. Belt Alignment:

Ensure proper belt alignment by checking the position of the belt in relation to the tensioner rollers and other pulleys. Misalignment can cause excessive wear, noise, and reduced efficiency. Adjust the tensioner rollers or other components as needed to maintain proper belt alignment. Consider using alignment tools or seeking professional assistance if necessary.

5. Cleaning:

Keep the tensioner rollers clean from debris, dirt, and buildup. Use a soft brush or cloth to remove any accumulated dirt or particles that may affect the roller’s performance. Avoid using harsh chemicals or abrasive materials that could damage the roller surface. Cleanliness helps maintain smooth operation and reduces the risk of belt slippage or premature wear.

6. Replacement:

Monitor the condition of the tensioner rollers and replace them when necessary. Over time, tensioner rollers can experience wear and may lose their effectiveness in maintaining proper tension, alignment, and damping vibrations. Follow the manufacturer’s recommended replacement intervals or consider replacing the tensioner rollers if significant wear, damage, or performance issues are observed.

7. Manufacturer Guidelines:

Always refer to the manufacturer’s guidelines and recommendations for maintenance practices specific to the tensioner rollers used in your system. Manufacturers often provide detailed instructions on maintenance intervals, lubrication requirements, tension adjustment procedures, and any specific considerations for the tensioner roller design. Adhering to these guidelines ensures optimal performance and preserves any warranty coverage.

8. Professional Assistance:

If you are unsure about any maintenance procedures or encounter complex issues with the tensioner rollers, it is advisable to seek professional assistance. Professional technicians or engineers with expertise in belt-driven systems can provide guidance, perform thorough inspections, and carry out maintenance tasks to ensure optimal performance and reliability.

By following these recommended maintenance practices, you can help ensure the optimal performance and longevity of tensioner rollers in belt-driven systems. Regular inspections, proper lubrication, tension adjustment, alignment checks, cleaning, timely replacement, adherence to manufacturer guidelines, and seeking professional assistance when needed all contribute to maintaining optimal performance and efficiency of the tensioner rollers.

How do tensioner rollers contribute to reducing wear and increasing the lifespan of belts?

Tensioner rollers play a vital role in reducing wear and increasing the lifespan of belts in various applications. They offer several key contributions in achieving these objectives:

1. Maintaining Proper Belt Tension:

Tensioner rollers help maintain the optimal tension in belts throughout their operation. Proper tension is crucial for efficient power transmission and preventing belt slippage. When belts operate under inadequate tension, slippage can occur, leading to increased wear on the belt and associated components. Tensioner rollers ensure that the belts remain appropriately tensioned, reducing wear and extending their lifespan.

2. Absorbing Belt Vibrations:

Vibrations can occur in belt drive systems due to imbalances, misalignments, or variations in load. These vibrations can accelerate belt wear by causing friction and excessive flexing. Tensioner rollers are designed to absorb and dampen vibrations, minimizing their impact on the belt. By reducing vibrations, tensioner rollers help to decrease wear and prolong the life of the belt.

3. Distributing Tension Evenly:

Tensioner rollers distribute tension more evenly along the length of the belt. They help prevent localized areas of excessive tension, which can lead to premature wear and belt failure. By ensuring a more uniform distribution of tension, tensioner rollers contribute to reducing wear and extending the lifespan of belts.

4. Compensating for Belt Stretch:

Over time, belts can stretch due to the mechanical stresses they experience during operation. Belt stretch can result in reduced tension and compromised power transmission. Tensioner rollers are designed to compensate for belt stretch by applying additional tension to maintain the desired level of belt tension. This compensation helps to prevent belt slippage, wear, and premature failure, thereby increasing the lifespan of the belt.

5. Reducing Belt Misalignment:

Proper belt alignment is essential for minimizing wear and optimizing belt life. Tensioner rollers assist in maintaining belt alignment by exerting consistent pressure on the belt and guiding it along the desired path. By reducing belt misalignment, tensioner rollers help prevent edge wear, side-loading, and premature belt failure.

6. Providing Belt Support:

Tensioner rollers provide support to the belt, especially in longer spans or applications with heavy loads. They help prevent belt sagging and excessive flexing, which can lead to accelerated wear and reduced belt life. By offering support, tensioner rollers contribute to minimizing wear and increasing the durability of the belt.

7. Facilitating Belt Tracking:

Proper belt tracking is crucial for belt longevity and performance. Tensioner rollers aid in maintaining belt tracking by applying controlled pressure and guiding the belt along the intended path. By promoting accurate belt tracking, tensioner rollers help prevent edge wear, rubbing, and premature belt failure.

8. Minimizing Belt Slippage:

Belt slippage can occur when there is insufficient tension or excessive loads in the system. Tensioner rollers help maintain the necessary tension in the belt, ensuring a secure grip between the belt and the pulleys. By minimizing belt slippage, tensioner rollers reduce wear, heat generation, and premature belt failure.

In summary, tensioner rollers contribute significantly to reducing wear and increasing the lifespan of belts by maintaining proper tension, absorbing vibrations, distributing tension evenly, compensating for belt stretch, reducing belt misalignment, providing belt support, facilitating belt tracking, and minimizing belt slippage. These contributions help optimize the performance, efficiency, and longevity of belt drive systems in various applications.

Can you describe the benefits of using tensioner rollers for optimal belt performance?

Using tensioner rollers in a belt drive system offers several benefits that contribute to optimal belt performance. Here’s a detailed description of the advantages of using tensioner rollers:

1. Maintaining Proper Belt Tension:

Tensioner rollers play a crucial role in maintaining the proper tension of belts within a drive system. They apply the necessary force to keep the belts taut, preventing slack and ensuring optimal power transmission. By maintaining proper tension, tensioner rollers help prevent belt slippage, which can result in the inefficient operation of engine accessories, reduced power output, and increased wear on the belts and other components.

2. Preventing Belt Misalignment:

Tensioner rollers also help prevent belt misalignment. When belts are not properly aligned, they can rub against other components, causing friction and wear. Misalignment can lead to excessive heat generation, noise, and even belt failure. Tensioner rollers, by maintaining the correct tension, help keep the belts aligned and running smoothly, minimizing the risk of misalignment-related issues.

3. Absorbing Belt Vibrations:

Belts in a drive system can experience vibrations due to various factors such as engine operation, load changes, or belt stretch. These vibrations can adversely affect belt performance and increase stress on the system. Tensioner rollers, with their spring-loaded design, help absorb belt vibrations and provide stability to the belt drive system. By dampening vibrations, tensioner rollers contribute to smoother and quieter operation.

4. Compensating for Belt Stretch and Wear:

Over time, belts can stretch or experience wear due to continuous use and exposure to various elements. Tensioner rollers are designed to compensate for belt stretch and wear by automatically adjusting their position. They help maintain the proper tension in the belts, compensating for any elongation or reduction in belt length. This self-adjusting feature ensures consistent belt tension throughout the lifespan of the belts, promoting optimal performance and longevity.

5. Improving Belt Lifespan:

By maintaining proper tension, reducing vibrations, and preventing misalignment, tensioner rollers contribute to the longevity of belts. When belts are under the correct tension and run smoothly, they experience less stress and wear, resulting in an extended lifespan. Using tensioner rollers helps protect the belts from premature failure, reducing the need for frequent belt replacements and minimizing downtime and maintenance costs.

6. Enhancing Overall System Efficiency:

Optimal belt performance achieved through the use of tensioner rollers translates into improved system efficiency. When belts are properly tensioned and aligned, power transmission between the engine and various accessories or components becomes more efficient. This can result in enhanced overall system performance, improved fuel efficiency, and reduced energy losses, leading to cost savings and better utilization of resources.

7. Simplifying Maintenance:

Tensioner rollers can simplify maintenance tasks in belt drive systems. Their self-adjusting capabilities reduce the need for frequent manual adjustments to maintain proper tension. Additionally, tensioner rollers are often equipped with visual indicators or markings that allow for easy inspection of their condition. This simplifies maintenance checks, making it easier to identify worn or damaged tensioner rollers and replace them promptly, ensuring the continued optimal performance of the belt drive system.

In summary, using tensioner rollers in a belt drive system offers numerous benefits for optimal belt performance. These include maintaining proper belt tension, preventing misalignment, absorbing vibrations, compensating for belt stretch and wear, improving belt lifespan, enhancing overall system efficiency, and simplifying maintenance. Incorporating tensioner rollers into a belt drive system is essential for maximizing performance, minimizing downtime, and ensuring reliable operation of the system.

editor by CX 2024-01-24

Product Description

Product Description

Product Name: VKM 25152 Timing Belt Xihu (West Lake) Dis. Pulley belt tensioner

Outer Diameter: 62.7 mm
Width: 25mm
Weight: 0.189kg
Material: Plastic

The VKM21131 Tensioner Bearing Pulley is suitable for Opel , Saab, Chevrolet

Carfitment and part number

OEM No. of the Belt Tensioner VKM 32243

CHEVROLET: 96413863

OPEL: 5718739

OPEL: 5535 0571

OPEL: 5636416

OPEL: 5636426

OPEL: 5636455

OPEL: 9128739

SAAB: 5535 0571

SAAB: 5636455

SAAB: 9128739

Reference No. of the Belt Tensioner VKM 32243

3RG: 13406

AIRTEX: ID- Alfa Romeo 5997325 VKM12101 CR1646 F-225717 Alfa Romeo 5972277 VKM122 Audi / VW 68,109,243 VKM11571 CR1682 F-9 Audi / VW 51,109,243 VKM11571 CR1863 F-22 Audi / VW 074109243R VKM11072 CR1889 F-234389 Audi / VW 57119243C VKM11105 CR1805 F-234396 Audi / VW 57119243K VKM11106 CR1892 F-232489 Audi / VW 06A109479C VKM11113 CR3140 F-123814 Audi / VW 036109243R VKM11120 CR3146 F-231221.1 Audi / VW 078109243C VKM112 Audi / VW B VKM21031 CR1681 F-853 Audi / VW 074109243A VKM21041 CR3123 F-210963.1 Audi / VW 57109243D VKM21045 CR3142 F-225766.1 Audi / VW 036109244D VKM21120 CR3145 F-231219 Audi / VW 036109181A VKM21121 CR3148 F-231220 Audi / VW 038109244H VKM21130 CR3 Audi / VW 038109244J VKM21147 CR3495 F-239652 Audi / VW 078109244G VKM21201 CR1643 F-123658 Audi / VW E VKM31 Audi / VW 57145276A VKM31 Audi / VW 078903341J VKM31571 CR3124 F-225712 Audi / VW 11281738605 VKM38.1 BMW 11281748131 VKM38.2 BMW 11311721263 VKM18 BMW 11311727611 VKM18 BMW 9571176 VKM7 Opel / GM 9158 Opel / GM 94149432 VKM15210 CR1883 F-123645 Opel / GM 97571530 VKM15213 CR1811 F-123806 Opel / GM 9128656 VKM15216 CR1810 F-232481 Opel / GM 14520-P2A-306 VKM73 HONDA 13404-PT0- HONDA 14510-PT0- HONDA MD146186 VKM75 Mitsubishi MD15718 VKM75 Mitsubishi MD128765 VKM75 Mitsubishi

Our Products:

Our company supplies a wide range of auto parts, such as belt tensioner, wheel bearing & hub assembly, clutch release bearings, motor bearings, rod bearing, crankshaft bearing, etc. If there are any needs of auto spare parts, please don’t hesitate to send us an inquiry, we will offer the price for your reference.

A wide range of applications of bearings:

• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• two Wheeler

Company Profile

Our Advantages

1. ISO/TS16949 Standard

2. Small order accepted

3. In Stock auto bearing

4. OEM bearing service

5. Professional Technical Support

6. Timely pre-sale service
7. Competitive price
8. Full range of products on auto bearings
9. Punctual Delivery
11. Excellent after-sale service
12. One-stop service
 

Packaging & Shipping

FAQ

If you have any other questions, please feel free to contact us as follows:

Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have a legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What are your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance.

Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

Contact Us 

What Is a V-Belt?

A v-belt is a type of belt that provides a continuous motion to the vehicle’s wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections – cushion rubber and compression rubber.

Link-type V-belt

A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven.
Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled.
The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive’s load-carrying capacity.

Classical V-belt

A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors.
The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt’s outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers.
Typically, classical V-belts are used in single-belt drives. Because they don’t require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.

Narrow V-belt

The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter “v” on the top side and a length of outside dimensions of 1.6:1.
The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt.
For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.

Banded belt

Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement.
Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band’s flexural strength and shock resistance. It’s sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength.
The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt.
Banded v-belts are popular with commercial applications. Whether you’re looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!

Traditional V-belt

Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions.
TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt’s lifespan is greatly increased because of this feature.
A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.

Metric V-belt

Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.
Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch.
Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.

Product Description

Product Description

Product Name: Timing Belt Tensioner Pulley VKM13246 for Peugeot Citroen 2.0 HDi Engines

Outer Diameter: 60mm
Inner Diameter: 13.3mm
Width: 30mm
Weight: 0.4kg
Material: Plastic

The VKM13246 Tensioner Bearing Pulley is suitable for CITROEN, LXIHU (WEST LAKE) DIS.A, FIAT, PEUGEOT

Carfitment and part number

OEM No. of the Belt Tensioner VKM13246

CITROEN : 0829.60

CITROEN : 0829.61

CITROEN : 0829.62

CITROEN : 0829.63

CITROEN : 6922.76

CITROEN : 

CITROEN : 

CITROEN : 

FIAT : 7903301226

FIAT : 94.3

INA : F-122985.5

INA : F-122985.51

IPD : 14-0149

LEMFORDER : 2576601

LEMFORDER : LF:25766 01:1

MS (Motor Service) : 340 5413

QUINTON HAZELL : QTT870

QUINTON HAZELL : QTT872

ROULUNDS RUBBER : BT1133

RUVILLE : 55921

SKF : VKM 13246

SNR : GT359.17

SPIDAN : 0.066921

SWAG : 9903 Alfa Romeo 5997325 VKM12101 CR1646 F-225717 Alfa Romeo 5972277 VKM122 Audi / VW 68,109,243 VKM11571 CR1682 F-9 Audi / VW 51,109,243 VKM11571 CR1863 F-22 Audi / VW 074109243R VKM11072 CR1889 F-234389 Audi / VW 57119243C VKM11105 CR1805 F-234396 Audi / VW 57119243K VKM11106 CR1892 F-232489 Audi / VW 06A109479C VKM11113 CR3140 F-123814 Audi / VW 036109243R VKM11120 CR3146 F-231221.1 Audi / VW 078109243C VKM112 Audi / VW B VKM21031 CR1681 F-853 Audi / VW 074109243A VKM21041 CR3123 F-210963.1 Audi / VW 57109243D VKM21045 CR3142 F-225766.1 Audi / VW 036109244D VKM21120 CR3145 F-231219 Audi / VW 036109181A VKM21121 CR3148 F-231220 Audi / VW 038109244H VKM21130 CR3 Audi / VW 038109244J VKM21147 CR3495 F-239652 Audi / VW 078109244G VKM21201 CR1643 F-123658 Audi / VW E VKM31 Audi / VW 57145276A VKM31 Audi / VW 078903341J VKM31571 CR3124 F-225712 Audi / VW 11281738605 VKM38.1 BMW 11281748131 VKM38.2 BMW 11311721263 VKM18 BMW 11311727611 VKM18 BMW 9571176 VKM7 Opel / GM 9158 Opel / GM 94149432 VKM15210 CR1883 F-123645 Opel / GM 97571530 VKM15213 CR1811 F-123806 Opel / GM 9128656 VKM15216 CR1810 F-232481 Opel / GM 14520-P2A-306 VKM73 HONDA 13404-PT0- HONDA 14510-PT0- HONDA MD146186 VKM75 Mitsubishi MD15718 VKM75 Mitsubishi MD128765 VKM75 Mitsubishi

Our Products:

ZheJiang Mighty Machinery company supplies a wide range of auto parts, such as belt tensioner, wheel bearing & hub assembly, clutch release bearings, motor bearings, rod bearing, crankshaft bearing, etc. If there are any needs of auto spare parts, please don’t hesitate to send us an inquiry, we will offer the price for your reference.

A wide range of applications of bearings:

• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• two Wheeler

Company Profile

Our Advantages

1. ISO/TS16949 Standard

2. Small order accepted

3. In Stock auto bearing

4. OEM bearing service

5. Professional Technical Support

6. Timely pre-sale service
7. Competitive price
8. Full range of products on auto bearings
9. Punctual Delivery
11. Excellent after-sale service
12. One-stop service
 

Packaging & Shipping

If there are any needs of Timing Belt Tensioner Pulley VKM13246 for Peugeot Citroen 2.0 HDi Engines, please contact us freely, we will provide the free samples and competitive price.

FAQ

If you have any other questions, please feel free to contact us as follows:

Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have a legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What are your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance.

Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

Contact Us 

Types of V-Belt Drives

When evaluating drive technologies, you might want to consider a V-Belt. Not only can it improve the performance of an older drive, but it can save you time and money in the long run. Industry standard V-belts are prone to failing because of excessive wear, heat cracks, and stretching. Inefficient and downtime resulting from frequent retensioning and replacement can cost your company both time and money.

Cross-

A cross-belt for a V-Belt is a belt that is used in a conveyor system. This belt consists of 2 parts: an elastomer core and a fabric cover. The elastomer core is typically made of high-shock-resistant polyurethane. Different manufacturers have different synthetic rubber stocks, which may be used to prevent premature failure and extend the operating temperature range of the belt. Ideally, a well-engineered V-belt is stiff in the width and flexible along the length of the belt. The fabric covers are generally made of 2 different types of rubber, including compression and cushion rubber.
The diameter of the driver and driven pulleys are important considerations for choosing the right cross-belt for a V-belt. This will determine the belt length. The length should be proportional to the diameter of the drive shaft. Smaller diameters are better for smaller belts, which can increase elongation, which decreases the life of the belt. Larger diameters, on the other hand, can increase slippage, fluctuating force, and power loss.
Choosing the right V-belt for your vehicle is important, especially if you’re replacing a worn-out one. In some cases, the old V-belt may become too loose or a loop with a rubber-coated edge. You should measure the length of the belt before you buy it. Using a flexible english measuring tape, you can determine which size is best for your vehicle.
A cross-belt can increase power transmission by minimizing slipping. It also provides shock-absorption and increases the load capacity of the V-belt. It is the best option for heavy-duty machines where torque and power are critical. In some applications, this belt may be more effective than an open belt. If you use it for short distances, a cross-belt can be a better choice.
When choosing a V-belt, make sure to check the power ratio. The power of a belt depends on the initial tension applied to it. Also, the friction between the 2 mating surfaces is a factor. A V-belt with a high power density is not suitable for close-center applications. You can choose a narrow V-belt if you need a narrow belt for your machine.

U-shaped

The V-belt is a versatile belt used in countless industrial applications. Advancements in engineering have led to many different types of V-belts. Whether it’s a U-shaped belt or a double-sided V-belt, proper installation and maintenance are crucial for trouble-free operation. Below are some common V-belt specifications. Read on to learn more! The U-shaped V-belt is 1 of the most common.
A V-belt is a flexible, pliable machine element used to transmit power between 2 or more rotating shafts. Its cross-section is trapezoidal, so that as the tension increases on 1 side, the belt wedges into the groove on the opposite side. The increased friction between the 2 components results in a high torque transmission and minimal power loss from slippage. U-shaped V-belts are ideal for a variety of applications, from lawn mowers to cars.
The U-shaped V-belt is made of 2 parts: an elastomer core and a textile cover. The core is made from a flexible material with high flexural strength and shock resistance. The cover is made of textile material that is treated to create a chemical bond with the belt’s core material. This makes it pliable and strong while preventing the cover from becoming worn out or damaged.
Unlike flat belts, U-shaped V-belts are designed to fit into a U-shaped sheave, which increases their lateral rigidity. They also maintain their stability under shock and vibration loads. Their simplicity makes installation and tensioning much easier. The constructional components of a standard V-belt are illustrated in Figure 9. Each component has a vital role in the belt’s performance. Similarly, different materials can influence the belt’s performance.
As with any belt, proper tension is crucial. Having a loose belt causes slippage and rapid wear, which robs you of energy and productivity. Likewise, too much tension can cause premature belt wear. Proper tension is defined as the lowest level at which the belt does not slip or squeal under peak load. This tension range can still operate a drive, so it’s important to find the correct tension for your particular application.

Cogged

There are many advantages of a Cogged V-Belt. Its extra-thick construction allows for bends around smaller pulleys. It also runs cooler and lasts longer than a traditional V-belt. In addition, it has a higher coefficient of friction than a wrapped V-belt. Cogged V-Belts can also resist heat, making them an excellent choice for high-temperature applications.
A cogged V-Belt is also less likely to suffer from heat buildup, which can shorten the life of a standard belt and increase downtime and replacement costs. A Cogged V-Belt is more expensive than a wrap-molded belt, but it will pay for itself in as little as 1 month. Most synchronous belt conversions pay for themselves in less than 2 years. A longer payback time is typical with a larger system.
Cogged V-Belts are used in many applications, including in-line conveyors, gantry cranes, and wind turbines. The belt itself is composed of various types of rubber and reinforcements. They undergo tensile and compressive stresses as each segment of the belt passes through the pulley. Therefore, a different type of material is needed for the bottom side of the belt. The ideal material for this area should have a high coefficient of friction and increased wear resistance.
The Cogged V-Belt has a trapezium-shaped cross-section. The fabric cover resists heat and abrasion and helps protect the internal components of the v-belt. The different types of materials used in the fabric cover are patented. In some cases, the fabric cover is made of Kevlar or aramid fiber. This allows for smaller pulley diameters and more flexibility.
A Cogged V-Belt is made of 2 pieces of material. One is thick and includes a pitch line while the other has a slack side. The top is thicker and wider, while the bottom side has a lower pitch line. The slack side has a less pitch and more tension. Using a Cogged V-Belt will increase your productivity and help you save money.

Wedge

The Wedge V-Belt is 1 of the most popular types of drive belts available. The patented, narrow-profile design allows for lighter, thinner belts with greater transmission capabilities. The HY-T V-Belt is constructed with Vytacord tension members for strength and dimensional stability, and includes a cushion made of engineered rubber compound. This belt is ideal for high-speed, high-resistance applications, such as compressors, stone mills, and centrifugal pumps.
HY-T CZPT(r) belts have a continuous V-section, and a wide angle of flexibility. They provide torsional rigidity in long-center drives and are resistant to oil. The CZPT(r) belt is available in lengths up to 140 inches. Its free ribs wedge into the sheave groove to reduce belt whipping. This belt is also designed to fit into new designs and applications, so it’s compatible with virtually any type of drive.
The Wedge V-Belt is a popular choice in industrial applications. Its narrow profile reduces drive weight and space, allowing for higher horsepower. In addition, it can carry a higher load than a standard V belt. Its low cost and high efficiency make it a popular choice for many industrial applications. In addition to industrial settings, it is a popular choice in automotive and construction applications. While it may seem like a complicated belt design, the Wedge V-Belt is ideal for industrial use.
Wedge V-Belts have the same contact angle as the traditional v-belt, but have a narrow upper width. Their narrower upper width decreases their weight, which equalizes the tension on the tensile cord. The wedge-shaped design improves grip and increases wedge effect. Its durability is excellent, and it also features a cog shape for greater gripping power.
Wedge V-Belts are an efficient way to transmit power between 2 drives. They can move significant loads and can achieve very high speeds. The wedged shape of the belt allows it to wedge into the groove when the load increases. Moreover, it minimizes power loss due to slippage. If you want to get the most out of a Wedge V-Belt, make sure it is made of a material that resists heat and moisture.